Water caps (750 ml)

• To protect and prepare the wood before varnishing. Transparent water bottom, seals the pore and regulates the absorption of wood. Quick drying and easy sanding. Suitable for sealing on furniture, cabinets, doors and all types of wood indoors. Does not alter the color of the wood.
• Cleaning Water Dilution Ready to use, if necessary to dilute 5% Yield 8-10 m2/L depending on type and condition of the holder Touch drying 1-2h approximately Repainting 3-6h Interior Use Brush Application, Short hair roller, Gun.
• HOW TO USE 1. Preparation of new wood: The wood should be dry and clean of dust, fats and other impurities, with a moisture content not exceeding 18-20%. Sand the wood in the direction of the grain to open pore. Homogenizes the product before and during use. Apply a layer of lid to the water. After about 3 hours sand the wood, if there is any irregularities apply a second layer.
• Damaged woods: Remove the enamel or varnish with Wood Stripper or sanding the wood and proceed as new wood. 3. Apply between 5 and 35 °C, with low temperatures delay drying. 4. Do not apply the product at elevated temperatures, or on surfaces exposed to strong sunstroke.
• 5. We recommend not to store product more than 12 months in its original container well closed and protected from weather, covered and temperatures between 5-35ºC.

For protecting and preparing the wood before varnishing. Transparent water bottom, seals pore and regulates wood absorption. Quick drying and easy sanding. Suitable for sealing furniture, cabinets, doors and all types of wood indoors. Does not alter the colour of the wood. Water cleaning dilution ready to use, if you need to dilute 5% yield 8-10 m²/L depending on type and condition of the stand. Touch dry 1-2 hours. Repainted 3-6 hours. Interior use brush, short hair roller, gun. How to use: 1. Preparation of new wood: the wood must be dry and clean from dust, fats and other impurities, with a moisture content of no more than 18-20%. Sand the wood in the direction of the grain to open pore. Evens the product before and during use. Apply a layer of primer to the water. After about 3 hours, sand the wood, if there is any irregularities apply a second coat. 2. Distressed wood: Remove the varnish or varnish with wood stripper or by sanding the wood and proceed like new wood. 3. Apply between 5 and 35 degrees Celsius, low temperatures delay drying. 4. Do not apply the product at high temperatures, nor on surfaces exposed to strong insolation. 5. We recommend that you do not store product more than 12 months in its original packaging well sealed and protected from the weather, covered and temperatures between 5 – 35 °C.