VMS Decal Set & Soften 2-in-1 30ml AX09

• Hobby Material
• Use a spare decal or something before testing
• Buyemes VMS (Poland) Material For Hobby Import

Buyemes "Decal Set Soften 2 in 1 Decal Soften Material for Hobby Decal Set & Soften is a decal softening agent that is a mix of adhesive and softener that can be used when applying decals. For decal work, we typically use two types of auxiliary materials. One is an adhesive that improves decal adhesion and the other is an softener to attach decals to uneven surfaces such as panel lines, bolts, welded seams, twinmerites, casting surfaces, etc. Conventional products use two solutions, so work is a mess, and you need to buy a set of two. Decal Set & Soften performs both roles on its own and is more gentle on decals and paint than conventional products. Product FAQ How to apply thin decals? - Make sure the surface is over 5 days after painting - Apply a drop of Decal Set & Soften to the area and place the decal in place. - Wait 45 seconds until the decal absorbs the liquid, then press the decal onto the surface to squeeze out excess liquid. - Use a watered brush to wipe the surrounding area clean while neutralizing excess decal fluid - If necessary, use a cotton swab to blend the decal into the surface. How to apply thick decals? - Make sure the surface is over 5 days after painting - Do 5 minutes of soaking test on the decal to make sure it is a thick decal. - Soak the surface of the decal in the liquid for 10 minutes. - Apply a drop of Decal Set & Soften to the area and place the decal in place. - Press the decal to the surface and squeeze out excess liquid. - Use a watered brush to wipe the surrounding area clean while neutralizing excess decal fluid - If necessary, use a cotton swab to blend the decal into the surface. How to confirm the type of the decal (whether it is thin or thick) Subject 5 minute immersion test. How many decals can I use? One model requires about 0.5-1ml of liquid depending on the amount of decal, and the bottle is 30ml in the bottle. The 1/35 scale model can finish 30 to 60 pieces. What cleaning agent should I use to clean the brushes? Enough with regular tap water. How long does it take to apply burnish? Wait 24 hours. During this time, the decal will fit perfectly. Do I need to apply a gloss burnish before applying the decal (to make sure the decal is properly placed)? Decal Set & Soften is formulated to allow the decal to slide easily over the surface without the need for a classic technique of gloss priming. When you apply the decal liquid over the burnish HD gloss the burnish coat has melted? Decal fluid should not be applied over burnish as it may melt burnishes. Burnish is best used to protect the decal after application. The liquid itself has the ability to slide the decal so there is no need for a glossy primer. Applying the decal liquid and the paint melt? We recommend applying the decal solution over two coats of paint that have been properly cured (over 5 days). If the two coats of paint after cured still affected, dilute the decal fluid with water. Mix 2 drops of liquid and 1 drop of water. If it is still too strong, mix 1 drop of liquid and 1 drop of water. Alternatively, you can dip the decal in the liquid for a few seconds and apply the model itself without any liquid. This method softens the decal while minimizing fluid contact to the surface of the model. For thin decals, the time you need to dip in from 10-15 seconds to a few seconds. Use a spare decal to test and confirm This product is made for hobbies. Does not include tools, glue, paint, batteries, etc.) other than this product.