Villkin Water butt connector with 3/4 inch (19 mm) thread, ideal for 22 mm drill hole including 25 cm hose with 20 mm diameter

• Ideal hose adapter – a hose nozzle with a 3/4 inch (19 mm) thread, which can be ideally used in 22 mm drill holes. The hole size may also vary.
• Super tight – the hose adapter comes with 2 seals, so that the drill hole can be sealed from both sides and no drop of water is lost.
• Includes hose – the set comes with a 25 cm long transparent hose, so you can observe the water flow. The hose has a diameter of 20 mm and fits perfectly on the hose nozzle.
• Easy to use: 1. Drill hole in water tank; 2. Insert hose adapter with seals; 3. Connect the hose. Ready in 5 minutes
• Our promise – we are a small company from Germany. You are our number one priority. We are there for you 24/7 and will help you with any questions.

Villkin rain butt connector with 3/4 inch (19 mm) thread, ideal for 22 mm borehole including 25 cm hose with 20 mm diameter. Do you want to fill several water butts evenly or prevent overflow in the rain? Then the Villkin rain barrel connectors are just the right product. You will receive a high-quality product which is 100% leak-proof and can be installed quickly. For installation, only an approx. 22 mm drill required. Depending on the type of attachment, the barrel connectors can quickly and evenly distribute the water in the tons or only drain excess water shortly before overflow. Advantages of the Villkin rain butt connector: High tightness thanks to the included seals, which should be used during installation. Includes a transparent hose so that the water flow can be viewed in 5 minutes. Depending on the installation height, can be used as an overflow protection or as a connection pipe between two containers to compensate for the water level.