Velux for permanent ventilation flap foam gasket for wooden Windows metre seals window 1.7in

• 1.7 inches wide
• One adhesive side
• 1 piece = 3.3 feet

The original VELUX foam seal 44 mm is suitable for all VELUX wooden roof windows! The foam seal for the ventilation flap of the roof windows is 44 mm wide and approximately 4mm thick With this seal, you can restore your windows' original insulating ability and prevent unwanted draughts. Especially in winter, energy can thus be easily saved and the environment protected. On the back, the seal is provided with a self-adhesive, which is covered by a protective film. The protective film can be easily removed by peeling off. VELUX Foam Seal is characterised by a closed-pore structure, which is UV-resistant and has a high compressive strength. Furthermore, the seal absorbs almost no water (below 1%), which significantly increases the life of this seal. The foam seal is produced in two widths: 44 mm for wooden windows and 54 mm for plastic windows. This self-adhesive Velux cellular rubber seal is suitable and fitting for all ventilation flaps of the Velux roof windows. For example: GGL, GGU, GPL, GHL, GDL, GPU, GTU, GHU, GXU, VL, VK, VKU etc. This offer is for one meter (1m) of foam seal for continuous ventilation flap. If you need, for example, 3 meters, then order 3 pieces, these will then be shipped to you in a single piece of 3 meters in length.