Vegena 1MM Lead Free Solder Wire,Solder Wire with Rosin Core Soldering Flux Sn 99.3% CU 0.7% for Electrical Soldering 100g

• Good solderability in both electrical conductivity and thermal conductivity. The melting point of the solder wire is 227℃. Precise processing thanks to the addition of flux.
• 100g solder tin ø 1.0mm, Sn / Cu: 99.3% / 0.7%; 2% flux content. Flexible, thin wire, perfect for soldering workers at home. With the solder wire spool, soldering can be done quickly.
• Solder wire produces less smoke and rosin splatter when soldering. Above all, it is lead-free and still flows very well on the solder joint thanks to the integrated flux.
• The solder itself melts quickly, allowing it to be applied to the required areas. After cooling, a shiny surface is created and the solder joints look great.
• The lead-free solder wire with rosin core is designed for DIY, repairing cables, radios, televisions, video recorders, stereos, headsets, motors, toys, circuit boards and other electrical devices.

Why choose us? - Flows well and heats up evenly. - The smoke formation is not as strong as with most soldering agents. - The soldering point cures quickly and cleanly. - The soldering point also remains smooth and shiny, and does not become rough. - The solder wire is tightly wound on a plastic roll and can be easily bent into shape to position the end over the solder joint. Technical data: Parameters: tin 99.3%, copper: 0.7% Rosin core: Flux 2.0% Melting point: 227℃ Wire diameter: 1 mm Package Contents: 1 x solder How to solder? 1. Prepare soldering wire and electronic soldering iron. 2. Contact the soldering iron with the solder joint. 3. Place the solder wire on the soldering joint when the base material is heated to the temperature that can melt the solder. 4. When a certain amount of solder has melted, remove the solder wire. 5. Remove the electronic soldering iron at an angle of about 45° when the solder point has been completely wetted with solder.