Vbestlife Expansion Card, 6-Port SATA 3.0 PCI Express Card Riser Card Compatible for SATA6G 3G 1.5G HDD, for Marvell 88SE92xx 109X

• Compliant with SATA 3.0 serial specification, backward compatible with SATA2.0 SATA1.0.Supports 4 SATA.
• Compatible with PCI Express v2.0 specification and backward compatible with PCI-Express v1.0.Support Hot Hot Swap.
• Support Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x and Gen 3i.Supports communication speeds of 6.0Gbps, 3.0Gbps and 1.5Gbps.
• Supports FIS based on port multiplier switch or command switching. Supports AHCI1.0 mode and IDE mode.
• Compatible with SATA6G, 3G and 1.5G hard drives. Support for native command queue (NCQ).

Specification: Name: 6-Port SATA 3.0 Expansion Card Model: PCE6SAT-M01 Main control: for Marvell 88SE92xx 109X. Interface: PCI-E 1x, 2x, 4x, 8x, 16x Support system: for WINXP/WIN7/WIN8/WIN10/LINUX Bus interface: PCI-Express x1 slot Expansion interface: 6 SATA3.0 interfaces Product size: approx. 12 x 10 x 2 cm / 4.7 x 3.9 x 0.8 inches. The PCIE to SATA3.0 riser card is used as follows: First, the connection conditions and solutions for the system hard drive and the PCIE to SATA 3.0 riser card: 1. The SATA interface mode from PCIE to SATA3.0 is the AHCI mode. If you want to connect the system hard drive on our card, you need to install your system hard drive in AHCI mode when installing the system on the motherboard. Otherwise, the system cannot be started via our transfer card. 2. If it is found that the SATA interface installation system of the system hard drive inserted in the motherboard is in AHCI mode, you can insert the hard drive directly into our card and then enter the motherboard BIOS to set the system hard drive as the first boot. 3. If the two above conditions are met and the hard drive interface of the motherboard still does not start or is repeatedly restarted, this may be due to the conflict between the hard drive interface of the motherboard and our transmission card. The solution is to call the motherboard BIOS and set the hard drive interface option of the motherboard to disabled. Save and restart to start the system. Package list: 1 x riser card. 1 x half-height baffle.