V2 Wally2-U-433 Original Receiver. 2-Channel Outdoor Receiver for V2 Phoenix, PHOX, Handy, TSC, TRC, TXC Remote Controls. 12-24V AC/DC

Description Specifications: Number of channels: 2 Operates with Royal or Personal Pass series transmitters: the first remote control to be memorised determines the mode of operation; Royal or Personal Pass. Monostable, bistable or timer operating logic. Possibility to select the contact type (N.A or N.C.) of the relay 1 through a dedicated jumper J1. The contact of relays 2-3-4 is of N.A. type, to have an N.C. contact. It is necessary to make changes to the hardware of the printed circuit Personal Pass Version: It is possible to store up to 1008 different codes with self-learning mode Memory full warning: the receiver blinks 15 times Self-learning of transmitters managed by radio Management of the substitutive transmitter It is possible to enable or disable the ROLLING CODE mode Basic programming using button P1 or advanced programming using the PROG2 (version 3.6 or newer) programming device and WINPPCL software (version 5.0 or newer) Frequency 433,92 MHz Power supply 12 - 24 Vac / 12 - 36 Vdc Relay contacts 1A / 30Vdc Temperature -20 ÷ +60°C Consumption 16 mA @ 24Vdc (stand by) Sensibility ? -103 dBm S/N > 17dB @ 100dBm m=100% Size 132 x 26 x 74 mm Protection degree IP55 RELAY CONTACTS The contacts to the terminal board concerning the four relays are of normally open (N.O.) type. For a normally closed (N.C.) contact of relay 1, move the jumper J1 to position 2 (Fig. 1) For a normally closed contact (N.C.) of relays 2,3,4 short-circuit point A with point B and cut the track at point C (Fig. 2) of the relay concerned.