USB Tester, USB C Tester Power Meter 2 in 1, 3.6-32V 0-5.1A Current Testers Meter, Voltmeter Voltage Capacity Testers, Battery Capacity Ammeter, Data Line, Mobile Power Charger Detector (Black)

• [Usb Tester] This multi-function USB tester can detect the voltage, current, capacity, power, power, temperature, resistance, charging time and other data of USB or Type-C port devices. It can also check the charging performance (charging speed and quality) of the charger and USB charging cable. It can also be used to test the capacity and power of mobile power. Measuring voltage: 3.6V-32V; measuring current: 0-5.1A.
• [USB Power Meter] The USB power meter is equipped with an OTG adapter, supports PD3.0/PD2.0, QC3.0/QC2.0, BC1.2 and USB A or USB C interface, and supports the newer iPhone 13 Pro mobile phones. (Supports iPhone 13/12/11/X/iPhone Xs fast charging, 29W power, 5V3A/9V3A/12V2.5A/15V2A). Compatible with MacBook, iMac, iMac Pro, Dell XPS, Acer Aspire, HP Spectre, Lenovo Thinkpad, Chromebook, Microsoft Surface Pro and more Type C devices and chargers.
• [USB Cable Tester] The tester can test the charging speed and quality of the USB data cable. Under constant power supply and continuous load, the greater the voltage of the USB data cable detected by this USB tester, the lower the voltage drop, indicating that the USB data cable quality is better.
• [Voltage Meter Tester] The USB tester can also test the charger. First, insert this USB tester into the USB charging port, and then use the adjustable constant current tester to adjust the current and detect the current and voltage data of the charger.
• [Watt Meter] To test the capacity and power of the mobile power supply, first make sure that the mobile power supply to be tested is fully charged, then insert this USB tester into the mobile power supply and press and hold to reset the capacity and power, then connect the mobile phone or load or other device to charge the mobile phone or other device until the mobile power supply runs out of power. Finally, the reading on this multimeter is the real capacity data of the mobile power supply.

Specification: Package Includes: 1*USB C tester Color: Black Measuring voltage: 3.6V-32V Measuring current: 0-5.1A Introduction: Timing shutdown and full power off setting method: Five-click the button on the main interface at the front desk to enter into the charging timing and cut-off duration settings, the "OFF" at the bottom of the screen flashing, short press at this time the "OFF" changed to 24:00, short press again to change to 23:00, then 22:00, until 1:00, to off again, cycling like this, the double-click to increase the number in adjustment, long press to increase or decrease the continuous time, after corresponding numerical values are setup, wait for a moment, flashing stops and horn sends out beep sound the system will automatically confirm the settings. When current flows through in charging process of AnJie next time, it starts countdown, and timing is end when countdown to zero, horn sends beep and cut off the output, charging stops, so as to protect the safety of your device and prevent over-charging. When you set the "AO..." intelligent power-off mode, the system will automatically monitor and calculate the power in less than 2W for about 1 hour, and the product will judge that the device is full and cut off the output, thus protecting your product! Application: 1. Test charging speed & quality of USB cable 2. Test capacity and electric energy of power bank Note: When the PD charger is exhausted, the tester will not display any parameters. Please insert the small adapter included in the package into the side hole of the USB tester to trigger the PD charging function on the tester. The PD charging function can only be triggered by inserting the small adapter. If the device you connect does not have a small adapter to trigger the PD charging function, the USB tester will not be able to display any corresponding data.