UNITEC Lustre Terminal Pack of 10 | 12 Pin | Can be Used up to 380 Volt | 1.5-6.0 mm² | Transparent

• Use: easy ladder insertion thanks to years of optimisation. The ladder can be easily mounted using a screw. In each of the lustre terminals you will find screw holes for quick installation
• Twist n pull: "twist 'n pull" allows you to reduce the required terminals from the entire terminal block
• Flexible: the terminals are made of polypropylene and are particularly flexible to work with them well. This helps especially in tight junction boxes and distribution situations
• Safety: the clamps comply with the applicable product safety requirements and are extensively tested with international test seals (including VDE)
• Design: the transparent design allows for faster connection and higher security
• Design: 1.5 - 6.0 mm²

Unitec 12 Pin Terminal – Pack of 10 The UNITEC chandelier terminals made of polypropylene are designed for attaching the connection wires for various devices. It is important that you know the voltage or amp number of the device in order to be able to use the corresponding terminals. The luster terminals are generally used for grounding electrical switches and/or sockets. Due to the construction, multiple clamps can be positioned in the strip. The Unitec terminals can also be used with devices with 380 volt voltage. The screw is equipped with 0.4 Nm torque and can be tightened without any problems, ensuring a tight fit of the ladder. Single-wire conductor cross-sections of 1.5 - 6.0 mm² can be installed with the help of these screws made of chrome-plated steel. The respective inserts are tin-plated steel. Easy connection The design of the 12 block terminal block allows for quick connection of the terminal wires. As the housing is transparent, the electrician can immediately see if the wires in the clamp have been properly attached or not. Once the wires are properly placed, the flat head screws on the clamp make fixing the wires simple and easy. Each terminal has the current in amps and the voltage in volts. So you can quickly identify the performance of the lustre terminal. With "twist 'n pull", the terminal can be easily and quickly reduced to the required number. Thanks to their particularly flexible behaviour, the connection terminals can be processed very well in tight junction boxes and distribution situations. VDE tested. A comprehensive test program, confirmed by international certification marks such as that of VDE, confirms the safety of the terminal strips, so that they can be installed properly. Technical details: Nominal voltage: 450 V fixed in position, 250 V loosely fixed. Cross section: single-wire conductors 1.5 - 6.0 mm². Stripping length: 5 to 6 mm. Temperature resistance: T80°C. UNITEC: Safe under power The UNITEC brand stands for a comprehensive and high-quality range in the field of electric. In addition to a wide range of energy-efficient electrical installation materials, UNITEC offers many other products such as installation boxes, plugs and couplings, fuses, cable ducts and tools. The aim of the brand is to make everyday life easier with innovative and practical solutions and to ensure more safety in the home, in the workshop or on the construction site.