ULAB Low Form Glass Beaker, Vol.5000ml, 3.3 Borosilicate Glass, Printed Graduation, UBG1024

• 1pc of 170oz(5000ml) glass beaker, tolerance is approximately +/- 5%.
• 3.3 Borosilicate glass, Uniform wall thickness.
• Extra large marking spot.
• Tolerance is approximately +/- 5%.
• ASTM Specification E960, Type I requirements.

ULAB Glass Beaker Set, Griffin, Low form, with Spout and printed graduations. Including 1pc of 5000ml (170oz) beaker. Remark: 1. Not suggest use beaker for accurate measuring, the graduation is for reference. 2. There should be no water droplets on the outer wall of the beaker when heated, Otherwise it will cause uneven heating. 3. When heating the liquid in the beaker, do not exceed 2/3 of the volume of the beaker, generally 1/2 of the volume of the beaker is appropriate. 4. During the dissolution or dilution process, when stirring with a glass rod, do not touch the bottom or wall of the beaker. 5. When heating corrosive drugs, a watch glass can be covered on the mouth of the beaker to prevent the liquid from splashing. 6. The beaker is a common laboratory glassware, usually made of glass, plastic or heat-resistant glass. The beaker is cylindrical, with a notch on the top side, which is convenient for pouring liquid. Some beakers are also marked with a scale on the outer wall to roughly estimate the volume of liquid in the beaker. After-Sales Service: ULAB Scientific guarantees that no sale is complete unless the customer is satisfied. If you have any questions or suggestions on our products or service, please do feel free to contact us. You'll get our reply within 24 hours. Thanks for your patience.