U-Shape TPE Edge Strip Self-Adhesive,5M*18MM,White Flexible Moulding Trim,Furniture Cabinet Edge Protection Tape,Peel and Stic for Tile, Wall, Mirror, Ceiling, Floor, Panel, Cabinet

• EASY PEEL-AND-STICK INSTALLATION - This U-shaped edge strip comes with a self-adhesive backing. No glue, no edge banding machine, no sanding is needed. Clean the board surface, tear off the red protective film, and press firmly. The adhesion strengthens over time for a secure fit.
• FLEXIBLE TPE MATERIAL FOR CURVED EDGES - Made of soft TPE, this edge banding can be bent and shaped to follow the contour of curved or irregular board edges. It remains flexible and does not crack, making it suitable for rounded furniture corners and special-shaped panels.
• TEAR-RESISTANT LAYER FOR ENHANCED DURABILITY - The edge strip includes a tear-resistant layer that provides additional toughness to the panel edge. This helps protect table corners from daily impact, reduces chipping, and extends the life of the furniture surface.
• WATER-RESISTANT SEALING FOR WOOD PROTECTION - The strip creates a sealed fit along the board edge, helping to block moisture and dust. This is useful for wood-based furniture in kitchens, bathrooms, or other areas where humidity may cause swelling or damage over time.
• CUT-TO-SIZE FOR CORNER AND EDGE APPLICATIONS - The 5-meter roll allows you to cut the exact length needed. For right-angle corners, cut a small 90-degree opening on the strip before pressing it down. Suitable for tables, cabinets, shelves, worktops, plywood, MDF boards, and marble edges.

Product Name: U-Shaped TPE Edge Banding Strip Product Material: Soft TPE (Thermoplastic Elastomer) Product Width: Approx. 18mm Product Length: Approx. 5m Installation Method: Self-Adhesive Product Use: Anti-Collision, Decorative Trimming, Dustproof, Edge Sealing Applicable Surfaces: Wood boards, plywood, marble, hardboard, MDF, furniture edges This U-shaped edge banding strip is designed for wood boards and is commonly used in home renovation, woodworking, and furniture edge protection. It helps cover exposed board edges, sharp corners, and minor surface imperfections. The strip is made from soft TPE material, which remains flexible and bendable. It can be cut freely to different lengths and adapted to straight or curved edges. The self-adhesive backing allows installation without additional tools or glue. A tear-resistant layer is integrated into the edge strip to improve toughness and reduce damage from daily bumps. The sealed fit also helps prevent dust and moisture from reaching the board edge, which can be useful for wood furniture in humid environments. Installation Steps: 1. Measure and cut the strip to the required length. 2. Clean and dry the board edge surface thoroughly. 3. Tear off the red protective film from the adhesive side. 4. For right-angle corners, cut a small 90-degree opening on the strip to help it lie flat. 5. Press the entire strip firmly along the edge to complete the installation. Note: Product dimensions are measured manually. Minor variations may occur. Please refer to the actual product for standard sizing.