Tyvek FlexWrap EZ Tape 60mm x 10m

• Tyvek FlexWrap EZ High Performance Flexible Self-adhesive Flashing Tape 60mm x 10m
• Tyvek FlexWrap flashing tape works seamlessly with Tyvek and AirGuard products to help you create continuous airtight and watertight seals.
• For all those tricky jobs, Tyvek FlexWrap tape will keep leaks and gaps at bay. Ideal for both internal and external use, this “magic” tape makes light work of sealing windows, chimney breasts, pipe penetrations and other custom shapes, ensuring air-tight and water-tight protection when you need it most.
• Short on time? Not a problem. The Tyvek FlexWrap tapes get the job done 50% faster than standard tapes and seals, and require no additional fixings. The durable Tyvek top sheet will adapt itself to structural movements.
• Tyvek FlexWrap is compatible with a huge choice of building materials and will adapt to common and uncommon shapes from windows to chimney breasts, creating a water-tight and air-tight seal that will withstand the elements.

Key Benefits of Tyvek FlexWrap Superior protection /air and watertight seals Helps seal the building envelope Creates more airtight seals compared to standard tapes used on irregular shapes/penetrations Easy installation Packaged in ready-to-use rolls No requirement for additional fixings Approx. 50% quicker to fit compared to standard tapes and seals Superior durability Extendable tape constructed with a durable Tyvek top-sheet, a premium butyl adhesive layer, and a specially designed split release liner Allows for structural movements UV resistant Excellent adhesion performance Ensures continuity, compatibility and integrity with all Tyvek breather membranes, AirGuard AVCLs and other membranes at penetrations 100% butyl adhesive performs over a wide temperature Exists in 2 versions: Tyvek FlexWrap NF and Tyvek FlexWrap EZ Key Properties Tyvek FLexWrap NF Elongation ca. 160 % (2,6 x of the original lenght) ca.160 % (2,6 x of the original lenght) Installation temperature > 0 °C > 0 °C UV resistance 4 months 4 months Installation of Tyvek FlexWrap tapes: Surface preparation The surface must be free from dirt, moisture, ice, grease and other materials which could reduce the adhesion. Tyvek FlexWrap is to be installed when dry and at temperatures above 0 °C. A primer may be used for application temperatures below 0 °C and non-ideal surface conditions. Installation Properly position Tyvek FlexWrap around the surface to seal. Minimise wrinkles and bubbles by smoothing the surface and by repositioning as necessary. Apply pressure by hand along the entire surface to achieve a good bond to the substrate. (After pressure has been applied repositioning may be difficult.) After completion of the installation Tyvek FlexWrap has to be covered within 4 months with the appropriate building materials.