Truvativ Bottom Bracket, BB30 to BSA Adaptor Kit without Tools

• Compatible with undamaged frames
• Designed with 68 mm BB30 bottom bracket shells
• Mild non-abrasive degreaser
• Installation tool not included
• Use the removal tools to push out the adapter

Product Description Truvativ BB30 to BSA Adapter will only work in undamaged frames in good condition. Installation tool not included with adaptor. The adapter must not be used as a way to repair frames with damaged bottom bracket shells. The BB30 Adapter To BSA enables the use of 68 mm threaded bottom brackets with spacers in frames designed with BB30 bottom bracket shells. BB30 Adapter To BSA can only be used in 68 mm wide frame shells that comply with BB30 machining specifications. If a BB30 crankset is already installed in the frame, remove the crankset according to the manufacturer's instructions. Be sure to remove the BB30 bearings and retaining clips. Using a mild, non-abrasive degreaser, thoroughly clean the bottom bracket shell, taking care to remove all grease. Using a headset press and included adapter installation tools, install the adapter with the double-grooved surface oriented on the drive side of the frame. Press adapter into frame until drive side edge of adapter is flush with drive side face of bottom bracket shell. Remove headset press and adapter installation tools and wipe off any visible Loctite from the frame, adapter and tools. Allow Loctite to cure for a minimum of 12 hours at 22 degree C (72 degree F) before installing bottom bracket. Do not chase or face the bottom bracket adapter. Ensure there is no Loctite on the adapter threads prior to bottom bracket installation. Use a headset press and adapter removal tools to push out the ada System Requirements continuity 2014 Box Contains 1x BB30 Adaptor Kit