Transistor Tester BSIDE ESR02 Pro Digital Transistor Tester SMD Chip Component Inductance Meter

• Easy to use: one-click operation, start the test and buy the key.Resistance: 0Ω ~ 50Ω, Resolution: 0.01 ohm, Capacity: 25pF ~ 100mF, Resolution: 1pF. Large LCD display with backlight for easy reading. The pin components are automatically tested and displayed on the LCD. Capacity ESR resolution: 0.01Ω
• Automatic detection -- Automatic detection components such as NPN, NPP bipolar transistors, N and P channel MOSFETs, diodes (including double diodes), thyristors, transistors, resistors and capacitors.
• Accurate measurement--can capture the forward preload of the transistor middle, the MOSFET diode and the reference of the gain factor.Measurements of the MOSFET gate threshold voltage and gate capacity.
• Application --- The instrument is an engineer, an electronic maintenance and factory device. Test plug-ins and SMD devices are very simple and can test different types of diodes, transistors, thyristors, analysis device types, pin polarity, output HFE, valve voltage, barrier layer capacity FET.
• Customer Service --- If you encounter any problems during use, please contact our customer service. We are there for you 24 hours a day.

Specification: Brand: Bside Model: ESR02 Pro Resistance: 0Ω~50Ω, Resolution: 0.01 Ohm Capacity: 25pF ~ 100mF, Resolution: 1pF Inductivity: 0.01 mH ~ 20 H, Resolution: 0.01 mH Capacitor Resolution: 0.01Ω Battery: 1 x 9V 6LR61 battery (not included). Colour: black Size: approx. 14 x 8 x 4.5 cm/5.5 x 3.1 x 1.8 inches. Weight: approx. 214g Use instructions: Press "POWER/TEST" to turn on and start a test. This button can be used to repeat multiple measurements. The automatic shut-off takes 20 seconds after measurement. There are three types of sockets available, each socket is connected to pin 1, pin 2 and pin 3. No instruction is required to place the device, and the screen shows the function of each pen after measuring. On the back there is a table with the "typical value of the electrolytic capacitor", which is used only for orientation typical value for an electrolytic capacitor with standard quality at room temperature. Package contents: 1 x Transistor Tester 1 x User Manual Note: Unload the capacitor before testing, otherwise it can damage the internal circuit. If you are using a DC power supply, please choose a 9-12V DC adapter. (including 9V and 12V). Can be powered by 9V 6LR61 battery (not included). When the battery power