tesa Luup soap holder, chromed metal, self-adhesive, adhesive mounting technology, 52mm x 150mm x 120mm

• No drilling needed: The tesa Luup soap holder is attached reliably with the patented tesa Power.Kit technology, the all-in-one adhesive solution.
• A classy sight: The stylish combination of satined glass and high gloss chrome is certain to delight the eye.
• Undamaged walls and tiles: Since adhesive is used for application, every surface stays intact. Whenever you choose, the holder is easily removable without a trace.
• Simple to apply: All required tools are included, no others are necessary. Clean the intended spot. Put the adapter on the wall. Fill the adhesive into the adapter until it shows up in the smaller hole. Allow 12 hours of drying time. Fasten the accessory to the adapter. It’s effortless to remount the holder in a different spot with a new adapter BK20.

tesa Luup soap holder - self-adhesive, chrome-plated metal, round styleTraditional mounting methods are reliable, to be sure, but they also leave a lot of damage in a bathroom that becomes apparent during a remodel. Thankfully, all of that can be avoided with the tesa Power.Kit technology, the formidable adhesive alternative. No drilling is required, thus walls and tiles remain unscathed. After 12 hours of drying, the adhesive safely attaches the tesa Luup soap holder.* Everything required for mounting is provided, no other tools are necessary.* Whenever you like, the holder can be removed without a trace.* You can also easily put the holder up again in a different spot with a new adapter BK20.* “Made in Germany,” the tesa Power.Kit technology provides a lasting and reliable hold.Soap is a constant companion throughout the day, and it’s nice to have it resting in as beautiful a place as this holder. With the satined glass dish and the glossy chrome of the bracket, it creates a beautiful ensemble that is an eyecatcher.Simple to attach1. Clean the surface, using pure alcohol or water. All dust and grease must be removed. When dry, the adhesive can achieve its top strength.2. Take the protective film off the adapter and apply it to the wall.3. Fill the adhesive into the larger hole until it appears in the smaller hole. 4. Allow 12 hours of drying time. Use the included Allen key to attach the holder to the adapter.You can take down the holder whenever you like. After detaching the accessory, twist the adapter off the wall with pliers. Use a scraper to eliminate any remaining residue.Enjoy the great benefits of the tesa Power.Kit adhesive technology with the tesa Luup soap holder! tesa.Power.Kit Glue: Warning! Hazardous respirable dust may be formed when used. Do not breathe dust.