TentSpares - Eurohike Rydal 500 Fibreglass Tent Pole Repair Kit, Tent Pole Replacement, Tent Poles, Camping Essentials

• ✔️ TENTSPARES - Tent pole repair kit is the perfect camping essential to take with you on your trip. These specific tent poles are for the Eurohike Rydal 500 Tent, which consists of 3 x 13mm diameter tent poles.
• ✔️ DURABILITY - Crafted from high-quality materials for long-lasting tent poles. These strong and sturdy tent pole replacement are designed to keep your tent securely pitched and standing firm in all conditions.
• ✔️ QUICK & EASY - Featuring easy-to-follow instructions, you’ll be back to enjoying your outdoor adventure in no time. Quick setup ensures you spend less time assembling and more time relaxing.
• ✔️ SIZE - These standard-sized tent poles are designed to fit your specific tent. If your poles are slightly short, simply cut these to the desired length using a junior hacksaw for a custom fit.
• ✔️ CONTAINS - This tent pole repair kit comes complete with all the camping essential parts required to repair or replace your damaged tent poles, ensuring your tent stays fully functional.

The Eurohike Rydal 500 Tent Pole Repair Pack consists of 3 x 13mm black fibreglass pole sections all fitted with a metal joining/end ferrule, a pole threader which is a steel wire with a sharp hook on one end, used to re-thread pole elastic and 1 length of elastic which measures 4 metres and will stretch to 7 metres approximately. Usage:Â Ideal as an emergency repair kit or to replace broken sections within a pole run. Replacement fibreglass pole sections are supplied at a length of 68.5cm (including ferrule) so you may need to cut them to size with a junior hacksaw. How to use: Disassemble the current pole assembly as follows: Hook the elastic holding pole sections at the end nearest the broken section and pull out so knot can be undone (or if necessary cut off). Release the elastic and pull back through pole sections to the broken section taking care to keep the pole sections in the correct order. Remove damaged section. Reassemble poles as follows: Replace broken section with new section. Using a length of wire fixed to the end of the elastic (e.g. using tape) feed the elastic through all the poles in the correct order and re-knot at end.