TECNOIOT 2 pieces UV ultraviolet sensor module 200-370 nm UV detection wavelength

• 【UV ultraviolet sensor】 ☆☆☆UV Sensor Module Ultraviolet Ray Detection 200-370nm Ultraviolet Wavelength☆☆☆
• 【Specifications-1】➮║Operating voltage: 3.3V-5V║✔Output voltage: DCO-1V (corresponding to UV index level 0-10)║Test precision: + -1UVINDEX║✔ Response wavelength: 200nm-370nm║✔Stable working: -20 degree -85 degree║
• 【Specifications-2】➮║✔Response time: less than 0.5 seconds║Working current: typical value 0.06 mA maximum value 0.1 mA║Size: 19.8 * 15mm║Designed for occasions requiring high reliability and precision to measure the Ultraviolet Index (UVl); Suitable for measuring the total amount of UV intensity of sunlight;
• 【Easy operation】Tested against World Health Organization UV Index Classification Standard UV Wavelength: 200-370nm; Very fast response and complete interchangeability;☆☆☆Arduino players need to set the MCU's IO port to input-receive mode, otherwise it cannot be used.☆☆☆
• 【Precautions】 ☆☆☆Other MCUs or more advanced control boards like Arm, if you need to set the IO port to input-output mode, you need to set it to input-receive mode, otherwise it cannot be used. The 51 series single chip microcomputer can be used directly without setting the input and output mode.☆☆☆

X2pcs UV Ultraviolet Sensor Module Ultraviolet Ray Detection 200-370nm Wavelength Specifications: Working voltage: 3.3V-5V Output voltage: DCO-1V (corresponding to UV index 0-10 level) Test accuracy: +- 1UVINDEX Response wavelength: 200nm-370nm Stable work: -20 degree -85 degree Response time: less than 0.5 seconds Working current: typical value 0.06mA maximum value 0.1mA Size: 19.8 * 15mm Features: Designed for occasions requiring high reliability and accuracy to measure the ultraviolet index (UVl); Suitable for measuring the total amount of sunlight UV intensity; Testing against the World Health Organization UV Index Classification Standard UV wavelength: 200-370nm; Very fast response and full interchangeability; Pin definition: VCC: power supply positive input port, access to 3.3V-5V voltage GND: power negative input OUT: analog signal output port, connected to McU I / O port Precautions: Arduino players should set the MCU's I / O port to input mode / receive mode, otherwise it cannot be used. Other MCUs, or more advanced control boards such as Arm, if you need to set the I / O port to input / output mode, you must set it to input mode / receive mode, otherwise it cannot be used. 51 series single chip microcomputer can be used directly without setting input and output mode. Packet Contains: 2pcs x UV Ultraviolet Sensor Module