SW-Stahl 11631L Separating Blade 12-75 mm I Bearing Puller I Ball Bearing Puller Tool for Tight Flush Bushings

• The bearing puller tool is used to loosen tensioned connections of components. Pressed, shrunk or retracted components that are held in their position by their own frictional force can be loosened with the puller.
• This cutting blade is used when pulling with trigger hooks is not possible as the components to be removed are too tight or flush.
• To use the puller, you will need the matching puller. To connect the components together, the tension bolts are screwed into the threads of the cutting blade. The suitable puller for this cutting knife is: 11640L or 11641L
• Two or three-leg internal pullers are ideal for loosening pressed parts of axles or from holes such as bushings or ball bearings. Among other things, the ball joint puller is used to pull on and off gears, bearing outer rings, pulleys, pole wheels, windscreen wipers and similar parts.
• Before using the puller car tool, remove all parts that could hinder the unhindered exit of the part to be removed, such as screws, nuts, wedges etc. The puller arms should be placed so that the bearing puller sits exactly in the pull axis.

For removing flush fitting components when removal with trigger hooks is not possible. Forged design. Sharp cutting edge connection screws with rolled thread. Only applicable in conjunction with the matching puller device: 11640L and 11641L.