Surebond Polyester Resin 400ml with Mixer Nozzle (12)

• 400mm Polyester Anchoring Resin 400ml with mixer nozzles
• Suitable for use in concrete, brickwork and stone
• Suitable for fixing wall ties, starter bars, studs & bolts
• 6 x 400ml cartridges will embed 10 x 1mtr helical bars
• Choose your quantity above

Polyester Resin can be used in many applications: Embedding crack stitch helical bars – 6 x 400ml cartridges will embed 10 x 1mtr helical bars in a 35mm deep slot. Suitable for use in concrete, brickwork and stone Suitable for fixing wall ties, starter bars, studs & bolts Suitable for close edge fixings Chemically resistant, Waterproof & vibration proof. SUREBOND, part of the SUREBOND range of polyester resin anchor grouts, is used for the fixing of steel bolts and bars into pre-drilled holes within concrete, rock, brickwork, stonework, masonry or other substrates capable of supporting the required load. Formed anchors are high strength fixings which are resistant to corrosion and may be loaded quickly after installation. Placed anchors are resistant to vibration, do not exert expansive forces and may be designed for under water installation. SUREBOND consists of a low viscosity polyester resin plus a catalysed filler. The two components are mixed to produce a filled resin grout, which may be poured or pumped into suitably prepared anchor holes. The mixed grout is coloured dark grey and is used for downward facing holes where the hole diameter is up to 25mm greater than the bolt or bar diameter.