Supermait for EPSON ELPLP95/V13H010L95 Original Lamp EH-TW650 EH-TW5650 EH-TW5600 EB-X41 EB-W42 EB-W05 EB-U42 EB-U05 EB-S41 EB-W39 EB-S39 PowerLite 2155W/2165W/2245U/2250U/2255U/2265U/5000/5510

• Compatible part number: ELP-LP95 / V13H010L95 Original Bulb
• Compatible Models: Compatible with Epson EB-2140w,EB-2155W,EB-2165W,EB-2245U,EB-2250U,EB-2255U,EB-2265U,EB-5520W,EB-5530U,PowerLite 2155W,PowerLite 2165W,PowerLite 2245U,PowerLite 2250U,PowerLite 2255U,PowerLite 2265U,PowerLite 5000,PowerLite 5510,PowerLite 5520W,Powerlite 5530U,PowerLite 5535U projectors.
• Original Bulb: As an OEM Bulb, it achieves a seamless fit with specific projector makes and models and enables effortless installation. It is fully compatible and guarantees a safe and long-lasting performance, with a brightness retention rate of over 90% after 2000 hours of use.
• Like New：By replacing with the authentic original lamp, your home theatre will be restored to its brand-new state.A lifetime three times longer than that of economic lamps.
• Supermait Services: We Will Provide 250 Days of After-Sales Service. If You Have any Questions About the Product, You Can Send us an Email or Leave us a Q&A. We Will Try Our Best to Solve This Problem for You.Prompt response and 95%+ issue-solving rate

Supermait Genuine OEM Bulb Original Projector Lamp / Bulb with Housing. Item model number: EP96. Compatible Models: Compatible with EH-TW650 / EH-TW5650 / EH-TW5600 / EB-X41 / EB-W42 / EB-W05 / EB-U42 / EB-U05 / EB-S41 / EB-W39 / EB-S39 / EB-990U / EB-980W / EB-970 / EB-2042 / EB-108 / EB-X39 / EHTW650 / EHTW5650 / EHTW5600 / EBX41 / EBW42 / EBW05 / EBU42 / EBU05 / EBS41 / EBW39 / EBS39 / EB990U / EB980W / EB970 / EB2042 / EB108 / EBX39 projectors. Installation 1. Make sure the projector power off(if in using, please wait at least 10 minutes for the lamp cooling) and remove the power cable. Locate the lamp panel, once located, unscrew and remove the cover. 2. Unscrew the 2-3 screws holding the lamp in place and carefully slide the lamp out of the projector. 3. Get out the new lamp from its package. Make sure do not touch the lamp directly, only the housing. Then install the lamp correctly. 4. Insert and firm the screws on each side of the lamp holder. When replacing the housing, make sure the new housing is secured and seated completely before operation. Place the cover back on the unit and re-install the screws. Plug the projector back into the power supply and restart the projector. Please refer the following considerations: 1. Make sure the conditions of the room is clean and ventilation. 2. Change or clean your projector air filter monthly. 3. Better let your projector rest for 15minutes per 4 hours running. 4. Do not unplug the power line before the cooling fan stop working.