Supermait EP71 A++ Quality Replacement Projector Lamp Bulb with Housing, Compatible with Elplp71, Fit for BrightLink 475Wi / BrightLink 480i / BrightLink 485Wi EB-1400Wi EB-1410Wi EB-470 EB-475W

• 🎦A꯭+꯭+꯭ ꯭Q꯭u꯭a꯭l꯭i꯭t꯭y꯭: Introducing Our Factory'S Exclusive Top-Quality Bulb, The Result of 12 Years of Outstanding Manufacturing and Relentless Research. We Have Successfully Developed a Premium Light Filament That Rivals Original Bulbs. Through Rigorous Performance and Lifespan Testing, Our A++ Quality Bulbs Have a Lifespan Comparable to, If Not Longer Than, Original Bulbs. Their Performance is Unparalleled.
• 🎦L꯭a꯭m꯭p꯭ ꯭T꯭y꯭p꯭e꯭: UHP (Ultra High Pressure): UHP is a Common Projector Lamp Technology, Which Uses the Technical Principle of High-Pressure Mercury Arc Lamp. an Electric Current Through an Arc Generated by High-Voltage Mercury Vapor Activates The Phosphor Layer, Resulting In a Bright Light. UHP Bulbs have High Brightness, Long Life and Relatively Low Energy Consumption.
• 🎦P꯭a꯭c꯭k꯭a꯭g꯭e꯭ ꯭C꯭o꯭n꯭t꯭e꯭n꯭t꯭s꯭: This Is the Complete Projector Lamp Module (Genuine Bulb And Genuine Housing Assembly), Not Just the Bulb,A Pair of Gloves is Included. Perfectly Compatible with Your Projector Just Like Original Lamps
• 🎦W꯭a꯭r꯭r꯭a꯭n꯭t꯭y꯭: We Will Provide 180 Days of After-Sales Service. If You Have any Questions About the Product, You Can Send us an Email or Leave us a Q&A. We Will Try Our Best to Solve This Problem for You.
• 🎦C꯭o꯭m꯭p꯭a꯭t꯭i꯭b꯭l꯭e꯭ ꯭M꯭o꯭d꯭e꯭l꯭s꯭:Compatible with EPSON ELPLP71 Brightlink 475Wi,BrightLink 480i,BrightLink 485Wi,BrightLink Pro 1410Wi,EB-1400Wi,EB-1410Wi,EB-470,EB-475W,EB-475Wi,EB-480,EB-480T,EB-485W,EB-485Wi,EB-485WT,PowerLite 470,PowerLite 475W,PowerLite 480,PowerLite 485W

Supermait A++ Quality Replacement Projector Lamp / Bulb with Housing. Item model number: EP71. Compatible Models: Compatible with BrightLink 475Wi / BrightLink 480i / BrightLink 485Wi / EB-1400Wi / EB-1410Wi / EB-470 / EB-475W / EB-475Wi / EB-480 / EB-480T / EB-485W / EB-485Wi / EB-485WT / PowerLite 470 / PowerLite 475W / PowerLite 480 / PowerLite 485W / EB-480E projectors. Installation 1. Make sure the projector power off(if in using, please wait at least 10 minutes for the lamp cooling) and remove the power cable. Locate the lamp panel, once located, unscrew and remove the cover. 2. Unscrew the 2-3 screws holding the lamp in place and carefully slide the lamp out of the projector. 3. Get out the new lamp from its package. Make sure do not touch the lamp directly, only the housing. Then install the lamp correctly. 4. Insert and firm the screws on each side of the lamp holder. When replacing the housing, make sure the new housing is secured and seated completely before operation. Place the cover back on the unit and re-install the screws. Plug the projector back into the power supply and restart the projector. Please refer the following considerations: 1. Make sure the conditions of the room is clean and ventilation. 2. Change or clean your projector air filter monthly. 3. Better let your projector rest for 15minutes per 4 hours running. 4. Do not unplug the power line before the cooling fan stop working.