Remote KING-GATES STYLO 4

• Unduplicated remote control with other universal remote controls
• Programming 1 Press the radio button on the receiver unit for 2 seconds: it will turn on a red led 2 Press the button of the new radio control for about 3 seconds (the LED flashes during insertion and then turn on fixed once the code 3 is stored. Wait 10 minutes and try the new radio control
• Instructions NOT included from the factory. Watch pairing method from the receiver.
• NOTE : To program the remote control, if you live in a condominium or more people have access to the gate, the control unit is probably blocked by the person who installed the system, and only the installer has the code to program it. In this case the remote control, even if you cannot program it, is not faulty, it is only likely that there is a block and you must contact the installer.

This KING-GATES STYLO 4 gate remote control has a frequency of 433.92 and has 4 button(s) and comes with programming instructions and batteries. Programming the remote control is very simple and does not require any special hardware. IMPORTANT: It is important not to confuse the 4 pen with the STYLO 4K model. In fact, these 2 models look similar in appearance. The STYLO4 transmitter remains compatible with all brand receivers, but does not work in Master Way mode. As for STYLO4K, this can work in Master Way mode. Also, this model is not compatible with older receivers such as Fred 11, Fred 22, Fred 33, etc. To distinguish models, press and hold a button on the remote control. If the LED is fixed, it is a 4K pen, while if the diode shines slightly, the beep is a PEN 4.