Stowe Oak Laminate Door Threshold Adjustable Height/Pivots 50mm x 90cm Easyclip

• Maximum difference in height between floor covering is 21mm, Maximum height of the higher floor covering is 28mm, covers flooring at the same level from 7mm up to 21mm in height. For joining floors of different heights of up to 14mm.
• Suitable for all floor types
• Suitable for under floor heating
• Self Adhesive
• Adjustable Heght and Pivot

Easyclip The Most Versatile professional Multi-Floor, Multi Purpose Thresholds suits all floor types, our 50mm door threshold range is adjustable in height & pivots to suit uneven floors & accommodates different flooring heights. the thresholds provides the perfect finish to any floor types, supplied with an adhesive strip as no screws or drilling are required for fitting, Supplied with single or 3 Clip System (Colour Dependent). Colour can vary slightly from batch to batch on certain colours. Image colour can vary on Device used to view them, Sample options are available in our amazon Store for colour matching purposes. Fitting Instructions (3 Clip System) Cut top of base to length & stick base to a clean dust free floor. Select the size of clips required or start with the smallest clip size, then tap, press or angle the clips and use a coin to insert the clips into the base spaced equally apart, in some cases the clips can be slid in from the ends. Press the top onto the clips at the desired angle to complete the installation, If you are unsure about the size of the clip the start with smallest & work upwards until satisfactory fit is achieved, you do not need to remove the smaller clips if larger ones are required. Fitting Instructions (1 Clip System) Cut top of base to length & stick base to a clean dust free floor, First try fitting the threshold without the clips, pressing the threshold straight onto the base. Second if this is not possible add clips to each of the four grooves which will raise the fitting strip. Third if still you cannot fit the threshold move clips to top level to complete the threshold Installation. Press the top onto the clips at the desired angle to complete the installation.