

Stormguard 7.6m Draught Excluder Seal Jointing Tape Weather Strip Insulation Doors Windows
About this item
- This is not Sellotape. Its about 10X thicker, its super sticky, and can be used in temperatures down to -12 deg C.
- Self Adhesive. Very versatile โ can be used externally and internally in wet conditions
- Seals gaps around doors and windows. Can be used in greenhouses, boats and loft spaces
- More permanent use for none opening windows and doors. Can be used in conjunction with Double Glazing film
- 48mm wide X 7.6M
Product description
Why Draught Proof? - Your house or commercial property will lose heat during cold weather partly due to poor thermal insulation, but also due to the air-leakiness of the building. This warm air loss is technically known as infiltration or permeability and is measured in metres cubed per hour per square metre of floor area. A typical building built 1900 to 1990 will lose around 20-30 metres cubed of air per hour per square meter of floor area. This is due to natural leakage through the fabric of the building, but largely through gaps around windows and doors. Good use of draft proofing could reduce your air permeability to around 8-10 metres cubed per hour which is a good low cost way of reducing your heating bills.The amount of air infiltration to your property will also depend on its exposure to wind so if you are on a hillside or near the coast then it is even more beneficial for you have good draught proofing.
Product details
Customer reviews
What customers say about Bigamart
10 Trustpilot reviews total, with 2 shown at a time.
I wrote to Bigamart's customer support and they accompanied the process of reshipping the item until it finally arrived. I felt a genuine effort to solve the problem till it was finally solved.
The package was here in Australia from England in a few days โ so quick! Something was missing and they refunded it straight away. Pretty happy with these guys.
You might also like
Similar items


Draughtex Floorboard & Skirting Board Insulation, Floor Gap Filler Draught Excluder - Thick 6-11mm 10m roll


