STHomedeco LED Strip Light, USB Powered COB LED Strip 8mm Narrow DC5V, Flexible Self Adhesive Cuttable LED Tape Light, Indoor Decor for Bedroom TV Living Room Kitchen Cabinet (6500K, 1M)

• 【SMOOTH COB LIGHTING – 320 LEDs/M】 High-density COB technology uses 320 LEDs per metre to produce a continuous, evenly distributed glow with fewer visible light spots. Suitable for comfortable accent lighting, indirect lighting and everyday home decoration.
• DC5V USB powered design works perfectly with laptop, power bank, USB adapter and car port. Safe low voltage makes it suitable for all indoor s【DIMMABLE USB 5V LIGHT STRIP】 Adjust the brightness from 20% to 100% using the touch control to create practical task lighting or a softer evening atmosphere. The low-voltage strip operates at 9W per metre and connects to a suitable USB adapter, computer or power bank.paces, easy plug-and-play without complex wiring for room decor and living room accessories.
• 【8MM NARROW, ADHESIVE AND CUTTABLE】 Only 8mm wide for fitting into narrow gaps, cabinets and shelves. The flexible LED tape has a self-adhesive backing and can be cut every 2.5cm at the marked cutting points to suit different DIY projects.
• 【1M USB CABLE, MULTIPLE INDOOR USES】 The 1m USB cable offers flexible placement for under cabinet kitchen lighting, TV backlighting, bedroom décor, wardrobes, shelves, headboards, mirrors, display cases, stair edges and gaming room setups.
• 【IP20 FOR DRY INDOOR AREAS】 Designed exclusively for dry indoor environments and not waterproof. Apply to a clean, smooth and dry surface. Fully unroll the COB LED strip before switching it on and never operate it while coiled on the reel.

Create practical task lighting and comfortable ambience with the STHomedeco COB LED Strip Light, a flexible indoor lighting solution designed for bedrooms, kitchens, living rooms, wardrobes and entertainment areas. Combining high-density COB technology, USB 5V power, adjustable brightness and an 8mm narrow profile, this LED tape is suitable for both everyday lighting and creative home decoration projects. The strip contains 320 LEDs per metre, distributing the light more evenly along the illuminated surface and reducing the appearance of separate LED points. It is suitable for use as an under cabinet light, kitchen worktop light, TV backlight, wardrobe light, shelf lighting or bedroom mood light. The smooth COB glow also complements display cabinets, dressing mirrors, headboards, bookcases, stair edges and gaming room décor. The integrated touch control allows the brightness to be adjusted from 20% to 100%. Increase the output for kitchen cabinets, reading corners and display shelves, or reduce it to create softer ambient lighting for a bedroom, living room or TV area. The rated power is 9W per metre; use a USB power source with sufficient output for the selected strip length. Powered by low-voltage USB 5V, the light strip can be connected to a compatible USB adapter, computer, power bank or other suitable USB power source. The supplied 1m USB cable provides convenient access to nearby USB ports without requiring a dedicated LED transformer. At only 8mm wide, this narrow COB LED tape can be fitted into compact spaces where wider light strips may be difficult to install. Its flexible construction follows straight or gently curved surfaces, while the self-adhesive backing supports quick installation on clean, smooth and completely dry surfaces. It is available in 1m, 2m, 3m and 5m lengths for projects of different sizes. The strip can be shortened every 2.5cm by cutting only on the marked cutting lines. Disconnect the USB power before cutting or installing the product. The removed section cannot operate independently unless it is fitted with a compatible power connector. With an IP20 protection rating, this USB LED strip is intended exclusively for dry indoor use. It is not waterproof and should not be installed outdoors, in bathrooms, near sinks or in places exposed to water, condensation or high humidity. For safe operation and better heat dissipation, fully unroll the strip before connecting it to power and never switch it on while it remains coiled on the reel.