Steel, 24 Pieces. HW 58502524 Router Bit Set for Woodworking, Woodworking Tools in Wooden Case Shaft Diameter 8 mm

• 24-piece cutter set with 8 mm shaft in a wooden case, consisting of:
• HW groove cutter diameter 6.0 / 8.0 / 10.0 / 12.0 / 12.7 mm; HW half-hollow cutter diameter 6.0 mm, R= 3.0 mm, D= 12.7 mm, R= 6.35 mm; HW half round cutter diameter 25.4 mm, R= 4.8 mm; HW folding cutter diameter 12.7 mm SL= 12.7 mm
• HW Copy Cutter Diameter 8.0 mm SL = 19.0 mm HW Quarter Rod Cutter Diameter 19.0 mm R= 6.35 mm HW-T Slot Cutter Diameter 9.5 mm SL = 11.0 mm HW-V Slot Cutter Diameter 16.0 mm Tophoek 90°
• HW Bevel Cutter Diameter 9.5 mm Bevel 9° - D = 12.7 Bevel 14° HW Rounding Cutter with Bearing Diameter 12.7 mm R= 3.0 / 6.0 / 10.0 / 12.7 mm HW Bevel Cutter with Bearing Diameter 12.7 mm Diameter 32.0 mm Bevel 45°
• HW flush-mounted cutter with starting bearing D= 12.7 mm D= 12.7 mm SL= 12.7 mm HW quarter rod mill with starting bearing D= 25.4 mm R= 6.35 mm - D= 28.7 mm D= 12.7 mm R= 8.0 mm HW fold cutter with bearing Diameter 12.7 mm T= 25.4 mm SL= 12.7 mm

Stehle 24-piece S8 cutters set in wooden cassette For a long service life, prevent early bursts from the carbide and a clean cut pattern high-quality HW sheets with fine grit. An anti-stick coating on the milling body contributes to better chip ejection and ensures less effort when working. Similarly, the resin and glue building is prevented. All included cutters comply with EU standard 847-1 and 847-2 according to the extended BG wood standard. Special characteristics Different hardness levels of the carbide adapted to the respective function of the cutter. (cutters have a harder HW than for example. Profile cutter.) Thick carbide plates allow frequent resharpening. HW cutting is not concealed by wax, i.e. no hidden damage or no annoying removal of the wax mass. Long shafts for optimal and safe clamping. Tension marking indicates how far the cutter should be clamped at least Precision ground shafts ensure absolutely clean round-run and prevent expensive damage to the recording of your router. Interchangeable quality ball bearings, standard sizes and a supplied hexagonal wrench Many cutters have an axle angle, therefore pulling cut and thus a clean milling pattern. Base body made of hardened quality steel (molybdenum steel). Very wear-resistant and durable. Supplied in a beautiful wooden cassette