Spektrum AR630+ 6 Channel AS3X+ & Safe Receiver SPM-1030

• Antenna-less design for easy installation and increased performance
• Built-in AS3X+ Stabilization System with SAFE flight envelope protection
• AS3X+ and SAFE set up through Forward Programming directly from your Spektrum transmitter
• Ready to use with Spektrum Smart ESCs for one-wire telemetry data without the need for modules, links, and wires
• DSMX protocol receiver with DSM2 backward compatibility

Product Description Spektrum AR630+ 6-Channel AS3X+ & SAFE Receiver Overview The AR630+ features fly-by-range telemetry, a bind button for easy binding with no plugs necessary, SmartSafe technology, Hold Last, and preset failsafe types set through Forward Programming. It also features Smart Telemetry support and Smart Throttle support. Additionally, Smart Model Files allow BNF models to be stored on the receiver to automatically set the model at bind. With Smart Technology, the normal servo connector delivers the throttle signal to the ESC, and the ESC sends telemetry data like voltage and current back to the receiver. The AR630+ receiver throttle port (Channel 1 port only) will automatically detect when a Smart-compatible ESC is connected. ESCs with Smart and IC series connectors can also pass along battery data from compatible Spektrum Smart batteries. Spektrum Avian ESCs are compatible with the AR630+ receiver for Smart Technology features. For Smart to function, you must have a Smart ESC paired with a Smart Telemetry receiver and a Spektrum DSMX transmitter with telemetry. An update for your transmitter may be required for Smart features. See www.spektrumrc.com to register and update your transmitter. If a standard ESC or servo is plugged into the throttle port on the AR630+ receiver, the throttle port will operate normally (PWM signal) like any conventional RC system. Please Note: These transmitters do not support Forward Programming devices: DX6i, DX6G2 (EU Version), DX7, DX7S, DX7SE, DX7G2 (EU Version), DX8, non-computer transmitters Directions 1. Bind the receiver using the bind button on the receiver and the corresponding function on your Spektrum transmitter. 2. Program the AS3X+ and SAFE settings directly from your Spektrum transmitter. 3. Connect the receiver to a Spektrum Smart ESC for one-wire telemetry data. 4. Ensure your transmitter is updated to support Smart features if using Smart Technology. Safety Warning WARNING: Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury. This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injury or damage to the product or other property. This product is not intended for use by children without direct adult supervision. Do not use with incompatible components or alter this product in any way outside of the instructions provided by Horizon Hobby, LLC. The product manual contains instructions for safety, operation and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid damage or serious injury.