sourcing map 6004ZZ Deep Groove Ball Bearing Double Shield 6004-2Z 80104, 20mm x 42mm x 12mm Chrome Steel Bearings, 1-Pack

• Size: 6004ZZ (Inner Dia.=20mm, Outer Dia.=42mm, Thickness=12mm)
• Shields on BOTH SIDES of the bearing to keep dust out. Suitable for high speed operation
• Chromium Steel long-life bearings, smooth and low noise
• ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
• Same As 6004ZZ / 6004-2Z / 80104. Pre-Lubricated, Easy to maintain

NOTE：Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product. Description:Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.With small friction and high-limit speed, Deep Groove Ball Bearings are cost-effective and require little maintenance.Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance.Single-row, pre-lubricated, normal accuracy. Selection Guide:Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.Sealed (Designation SuffixRS/2RS) - Made of sheet steel reinforced rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings. Specification:Model: 6004ZZShield Type: Double ShieldCage Material: Stamping SteelInner Diameter (d): 20mmOuter Diameter (D): 42mmThickness (B): 12mmDynamic Load Rating (Cr): 9.38kNStatic Load Rating (Cor): 5.02kNAccuracy Class: P0 (ABEC1)Noise Level: Z2Number of Pack: 1 PcsWeight: 40g