SOMATHERM FOR YOU 232-20S Limiter Temp Adj. 20/27 Thermostat Integrated étanchéiété Adjustable MMM20/27 Meets The Standard NF079 Safety Anti-Burn Safety legionella, None

• Adjustable thermostat safety limiter MMM20 / 27 (34 / inches) - type RU - to install the outlet of the water heater or thermodynamic DHW - safety scald: lower output water temperature of no more than 50 °C - safety anti-legionella: storage of hot water at a temperature of over 55 °C - sealing by an O-ring - shut Corner valves. - Removable fittings - Sealing by O-ring. - Maximum static pressure 10 bar. - Maximum dynamic pressure 5 bar. - Minimum flow rate 4 l/min. - Flow rate at 3 bar: 34 l/min. - Minimum temperature difference from mixed water to hot water: 15 °C - adjustment range from +35 °C to +50 °C
• Water heater inland exit bathroom entrance, kitchen and shower (communities)
• When hot water is generated at a temperature of over 60 °C, a temperature lowering device is arranged. This device should be placed in the same room as the device to generate hot water.
• The installation must be carried out according to the rules of practice, technical and DTU. Power. Before installation, it is advisable to prevent the supply line. Impurities interfere with the function of the device. The limiter must not suffer any mechanical impact or an area (especially associated with a lack of support or extension). Check and correct the alignment of the piping in the axis of the material.
• Maximum temperature 90 °C, maximum pressure: 10 bar

Somatherm for you - Limiter s & eacute; Safety & eacute; Thermostat & agrave; Improved é i & eacute É sealing; t & eacute; int & eacute; g & eacute; e, r & eacute; adjustable MMM20/27 - compliance & agrave; the standard NF0. =======& eacute; safety & eacute; anti-br & ucirc; bait - S & eacute; safety & eacute; the anti-é. Gionnelles For the item: Limit value s & eacute; safety & eacute; thermostat r & eacute; adjustable MMM20 / 27 (34 / inches) - type UK - For the installation output heater, pr & eacute; parateur ECS or thermodynamics - S & eacute; safety & eacute; anti-br & ucirc; burns: temperature e extinguishing water outlet inf é higher or é scores & agrave; 50 & deg; C - S é safety é anti l é gionnelle. create a hot water setting for an agrave; Temp é rature supE higher & agrave; 55 & deg; C - ETANCH dé; ë by O-ring - check valves int é gr é s - Fittings can be mounted dé - ETANCH é ë O-ring - Maximum static pressure 10 bar - Maximum dynamic pressure 5 bar - D.. é ... Bit at least 4 l/mn - D. Bit & agrave; 3 bar & nbsp;:.. 34 l/min - Temp Ediff é rature; Minimum water competition hot & agrave; Water in middle Ee & nbsp; :. 15 & deg; C - beach rE setting from + 35 & deg; C & in + 50 & deg; C. . Product description: used to avoid the brul & ucirc to é; res li & eacute; es & agrave; Temp é output extinguishing water & agrave; the valve output. Applications: Hot water output. Enter & eacute; bathroom, kitchen and shower (collectivit & eacute; s). Compatibility: When hot water is produced & agrave; Temp é extinguishing sup & eacute; & agrave higher; 60 & deg; C, a downward temp é device; rature should be arranged. This device must be placed and eacute; most pr & egrave; s possible to the device for hot water in the m & ecirc production. Local me Please note: L & rsquo; & installation must be ecirc, will be re alis & eacute; e according to é ment to R & egrave; rules & rsquo; practice, technical and DTU. Power Before installation, it is advisable and eacute; clean the pipes & rsquo; diet d & rsquo; and eacute; avoid impurities and eacute; s, the proper functioning of the & rsquo ;. Unit. The limiter may not interfere with traction m & eacute, mechanical or port & eacute; e (li Ee including & agrave; missing support or & agrave; expansion). Check and if E for CH é ant correction of the & rsquo; alignment of pipes in & rsquo; . Axle of the mat E material. If the limiter is mounted in an area and the risk of frost, it is necessary to use the insulate and insulate. It is necessary to connect the power D & rsquo; hot water and D & rsquo; cold water to the input limiter (C & rsquo; entr é ed & rsquo; hot water, for F & rsquo; entr é ed & rsquo; cold water and mix. For & rsquo; water in the middle of the eg). the limiter and its connections. Free from & rsquo; acc & egrave; s for interventions é ventuelles L & rsquo; & eacute; densely improved & eacute; it & eacute; the mixer limiter rE alis Ee through the seal pr E to the connection & agrave; É rotary nut and the & rsquo ensured; & eacute; improved seal & eacute; it & eacute; on the pipe. other products. (especially fibres and for P & acirc; te & agrave; attached) that could be & rsquo; & ecirc; employees & eacute; & eacute; s the & rsquo to perform improved seal & eacute; it & eacute; & ecirc should not be used, e.g. s. The torque should be & ecirc; & Eacute; the fitting & diagrave; É rotary nut and limiter mixer thermostat (up to 30 Nm). Limiter Temp é Erasure must & ecirc; Can be installed with fittings including check valves at the input and eacute; hot and cold water. . Technical conditions for use: Temp & eacute; erases max: 90 & deg; C Maximum pressure: 10 bar.