Pack of 2 - Solvent Weld 32mm Waste Pipe Conversion Bend - White

• This product is made to be installed with 36mm (known as 1 1/4 inch solvent weld) pipe or fittings. If your pipe or existing fittings measure 32mm, or has PP printed on it, then this product is not compatible and you will require 32mm pushfit or compression fittings.
• This listing is for a Pack of 2
• Solvent weld waste pipe conversion bend designed to join 2 waste pipes in a 90 degree configuration, one side to accept a pipe and one side to fit into another fitting
• Solvent weld fittings are secured using solvent weld cement for a permanent and strong installation.
• Being a conversion bend the female end will accept 32mm (36mm) solvent weld pipe and the male end is designed to go into a 32mm (36mm) solvent weld fitting.

Buy a Solvent Weld 32mm (Actual Pipe Size is 36mm) Waste Pipe Conversion Bend - White from a large range of Solvent Weld Elbows in our Solvent Weld (ABS) Pipe & Fittings section. IMPORTANT NOTE: Solvent Weld Waste Pipe fitting sizes are often stated in metric standard measurements, however the actual pipe size is measured in imperial. The three options are as follows - 32mm Solvent Weld Pipe actually measure 1 1/4 inchs or 36mm, 40mm Solvent Weld Pipe actually measure 1 1/2 inchs or 43mm, 50mm Solvent Weld pipe actually measure 2 inchs or 56mm. In addition if the term "ABS" is printed on the pipe this identifies the pipe as solvent weld waste pipe.