SOLAREZ Sponge-Rez Bodyboard & Swim Fin Repair (2 Oz) ~ Tough, Clear, Ultra-Flexible Resin, Works on Ethafoam, Surlyn, EVA, Vinyl, and Arcel Board Repairs, NOT for EPS! ~ Made in The USA! (2.0)

• Sponge-Rez is a tough, clear, ultra-flexible resin formulated to mend the most common types of catastrophes bodyboards are heir to; worn-out leash anchors, creased bottoms, delaminated decks, hulls or rails, sponge-deck or rash-deck, and semi-fatal gouges.
• Sponge-Rez works on all types of bodyboard materials including Ethafoam, Surlyn, EVA, Vinyl, and Arcel.
• Sponge-Rez alsp repairs cracked, weathered swim fins. If applied to the fin blades, it increases their stiffness and thrust.
• These resins cure exceptionally dry unlike other resins that cure tacky.
• Note: NOT for use on EPS (Styrofoam) cores - Made in the USA!

Solarez Sponge-Rez is a tough, clear, ultra-flexible resin formulated to mend the most common types of catastrophes bodyboards are heir to; worn-out leash anchors, creased bottoms, delaminated decks, hulls or rails, sponge-deck (also known as rash-deck) and semi-fatal gouges. Sponge-Rez works on all types of bodyboard materials including Ethafoam, Surlyn, EVA, Vinyl, and Arcel, however, it will melt styrofoam (EPS) cores. Sponge-Rez also repairs cracked weathered swim fins. If applied to the fin blades, it increases their stiffness and thrust. Use on Ethafoam, Surlyn, EVA, Vinyl, and Arcel Repairs cracked and weathered swim fins Increases stiffness and thrust General Directions: Surface should be clean, dry, and free of dirt, and or wax. Use in well-ventilated area, preferably outdoors. DO NOT inhale vapors. Apply liberally on porous surfaces. Use a spreader to force Sponge-Rez into the damaged part of the board. Do not apply Sponge-Rez with your fingers. Sponge-Rez will "skin-over" in about 10-15 min. and feel dry in about 2 hours but a complete cure takes 24 hours - especially when filling deep gouges.