Socobeta Drone Strobe Light, USB Charging Drone Anti Collision Light High Light Transmittance Resin Strong Compatibility for Camping

• Applicable Models: Suitable for Mini 3 Pro, for series, for Spark, for Phantom 3/4, for FIMI X8SE, for FIMI Mini, etc., suitable for flying, riding, camping, lighting, hiking, climbing signs, remote control and other situations.
• High Brightness Flashing: High light transmittance, visible range up to 6KM in clear weather when flying at night (due to the influence of the weather environment, the actual visible distance of the strobe light in the night sky may be different, the data is for reference only).
• Three Colors: White, red, green, cool visual effects, 10 modes of flashing frequency (9 flashes and white light always on), easy to switch with one button.
• USB Charging: Use the computer USB port or other 5V 1A power supply to charge, does not support the use of fast charger charging, the is charging, the green light shows that it is fully charged.
• Light Weight: The exterior is wrapped by a transparent film, with a small size and lightweight design, ensuring high power while reducing weight without affecting the flight of the drone.

Specification: Item Type: Drone Strobe Light Material: Resin (circuit board) Gross Weight: 31g / 1.1oz Color: Transparent Light Color: white, red, green Built in Battery: 3.7V 90mAh lithium battery (built in) Charging Time: 30 minutes Service Time: Red and Green Quick Flashing: about 7 hours Red and Green Slow Flashing: about 6 hours White Steady: about 1 hour White Quick Flashing: about 4.5 hours White Slow Flashing: about 2.5 hours Charging Voltage: 5V 1A Charging Port: Type C charging port Light Source Mode: fast blinking, slow blinking, steady on Long Press Key: switch on and off Click Button: switch the light flashing mode Charging Indicator: red is charging, green is full Product Size: Approx.2.8 x 1.6 x 1cm / 1.1 x 0.6 x 0.4inch Applicable Models: for Mini 3 Pro, for series, for Spark, for Phantom 3/4, for FIMI X8SE, for FIMI Mini Instructions for use: 1. Hold down the on off button for 2 seconds. 2. After starting up, the single machine button can switch the light model circularly. 3. After shutdown, press the button to check the remaining battery power before the point, and keep it for 6 seconds. Installation method: 1. Stick two sides of on the drone and the flash light respectively. 2. Rub each other after pasting to it stick firmly. Package List: 1 x Strobe Light 1 x Charging Cable 1 x A Set of Accessories in Total) 1 x Instruction Manual Note: 1. Drone and other accessories are not included in the delivery; 2. Due to manual measurement, please allow an error of 1‑3mm. Thank you very much! 3. Due to different shooting lights and differences between monitors, the picture may not reflect the actual color of the object.