Sockets Switch with Wireless Remote Control for Light, Household Appliances Home Programmable Electrical Plug Outlet Switch 30m/100ft Operating Range 5 Pack

• The Outlets can be manually operated or via the handy remote control. Just hard-to-reach appliances and devices at the push of a button on the remotes. The socket receiver will still remain in the "OFF" mode after a power out,even when the power comes on again
• Easy to control and there is individual ON & OFF function for the remote control, Remotely control hard-to-reach home appliances and devices at the push of a button on the remote, an ideal ally to those with limited mobility, enjoy a smart home life
• Easy to use and operate. Use one transmitter to match more socket receivers or program more than one transmitter to each socket. Any one transmitter and socket receiver can match use after finish programming operation. So the socket receiver and remote control can sell separately.
• Up to 30/100ft operating Range, strong RF signal works through doors and walls without interfering with other home appliances or devices. Allows you to match any remote and outlet to each other regardless of the frequency
• Great for remote control home electronic devices such as lights, TVs, chargers, manage home appliances and decrease your power cost. Use the sockets for device management, as it is great for inaccessible outlets or for people with limited mobility. Saving energy and save 10-30% on your electricity bill and extend the life of your appliances by 15%

Control Your Sockets: -Simple and easy to use, no installation required - just plug in and use. -Remotely switch on/off any appliance at the push of a button. -Ideal for appliances which have to be re-set by turning the mains supply off at the wall. -An ideal gift for home appliance control and holiday decorations such as Christmas. -An ideal ally to those with limited mobility. -Eliminate wasteful standby power and reduce energy use. -Strong RF signal works through doors and walls without interfering with other electronics. -Features low standby power consumption. -Outlets remain off after a power outage to save energy. -Turn lights on and off at night without having to go to each switch. Technical data: Working Voltage for socket: 230V~/50Hz Transmission frequency: 433.92MHz Max.load current: 10A Power for transmitter: DC12V 23A battery(not include) Re-program the remote control transmitter and socket: 1.Plug the remote controlled socket to a power point and turn the power on. 2.Press and hold the learning button on the right and side of the socket receiver for about 5 seconds till the LED indicator flashes. 3.Release the learning button and press the preferred "on" or "off" number button of the transmitter. 4.Programming successful when the LED indicator stops flashing. 5.The remote controlled socket is now ready to use. 6.Remote set up only requires one-time programming. Notes: -Make sure the battery and socket installation is firm,safe and correct. -For indoor use only,it should be installed in the places of aeration and far from high-temperature source. -Make sure to avoid strong sunlight,raining and moisture places. -Do not exceed the maximum load current. Package included: 5 Sockets and 2 Remote(not include batteries) 1 x Instruction Manual