Smooth-On Rebound 25 Brush Platinum Silicone Moldmaking Rubber

• Rebound 25 is soft, flexible and is good for making molds of models with deep undercuts.
• Depending on model configuration, Rebound 25 can be inverted as a glove molds.
• Rebound will not stick to most surfaces, so surface preparation is minimal
• Two liquids that mix easily together

Rebound 25 is an easy-to-use platinum cure silicone rubber that self-thickens for making brush-on molds of almost any model. Mixed 1A:1B by volume (no scale necessary), Rebound 25 rubber can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexible rubber. It is soft, flexible, and works great for making molds of models with deep undercuts. This brushable silicone rubber can also be inverted as a glove mold, depending on model configuration. Applications include reproducing sculpture, architectural restoration, making candle molds, casting pewter, etc. Rebound 25 products will not work with modeling clays containing sulfur under any circumstances. All Rebound 25 platinum silicones will last for many years in your mold library when used and maintained as recommended. IMPORTANT: Use this product in a properly ventilated area with at least room size ventilation. Wear safety glasses, long sleeves and vinyl gloves to minimize contamination risk. Store and use material at room temperature (73°F/23°C). Follow directions on the mold material technical bulletin before proceeding. Because no two applications are quite the same, a small test application to determine suitability for your project is recommended if the performance of this material is in question. Refer to technical bulletin for more information available on the Smooth-on website.