SKF SY 25 TF Y-Bearing Plummer Block Unit

• Design: Grub screw
• Purpose specific: For agricultural applications

Y-bearing Plummer block units. Material: Cast iron. Sealing solution: Standard seals with additional flingers. Unit system: Metric. Bore diameter d: 25mm. Base width A: 36mm. Top width A1: 22mm. Standout of end cover A5: 18mm. Width inner ring B: 34.1mm. Overall bearing width B1: 34.1mm. Overall height H: 70mm. Height of spherical seat center H1: 36.5mm. Foot height H2: 16mm. Distance between attachment bolts J: 102mm. Distance between attachment bolts Jam: 110mm. Distance between attachment bolts Join: 94mm. Overall length L: 130mm. Length of attachment bolt hole N: 19.5mm. Width of attachment bolt hole N1: 11.5mm. Distance from locking device side face to raceway center s1: 19.8mm. Housing thread for the grease fitting RG: 1/4-28 UNF. Axial position of the housing thread R1: 2mm. Angular position of the housing thread R: 45. Diameter of head sphere of grease fitting DN: 6.5mm. Hexagonal key size for the grease fitting SWN: 7mm. Thread of the grease fitting GN: 1/4-28 SAE-LT. Distance of dowel pins J6: 120mm. Axial offset of dowel pins J7: 13mm. Recommended diameter for dowel pins N4: 4mm. Basic dynamic load rating C: 14kN. Basic static load rating C0: 7.8kN. Fatigue load limit Pu: 0.335kN. Limiting speed: 7000r/min. Notes: (with shaft tolerance h6). Hexagonal key size for grub screw N: 3mm. Recommended tightening torque for grub screw: 4Nm. Recommended diameter for attachment bolts, mm G: 10mm. Recommended diameter for attachment bolts, inch G: 0.375in. Bearing: YAR 205-2F. End cover: ECY 205.