SinkFix Wash Basin Fixing Kit | Heavy Duty | Plasterboard & Solid Walls | Sink fixings, Sanitary fixings for Wall Hung Basins | Free IXPE Sound dampening Sheet | Direct from Manufacturer

• M10 x 70mm SinkFix bolts adjust up to 300mm apart
• Large enough to spread the load, small enough to be covered even by the slimmest of basins
• Unique SinkFix 'Wing' nylon bushings adjust the level of the sink and make installation easier
• 15 x Countersunk holes offer fixing choices and finding the stud in plasterboard walls easier
• Works with basins 400mm in width and upwards
• Can be installed on a pre-tiled wall

SinkFix Original from the manufacturer SinkFix is a heavy duty high quality sanitary fixing for bathroom wash basins or sinks. It is spray coated steel 3.8mm thick with multiple fixing choices enabling a strong fixing on poor brickwork or plasterboard walls. (we recommend you find a stud) The M10 x 65mm steel bolts slide out to a maximum of 300mm apart. The plate itself is 370mm wide so 400mm wide basins and upwards will cover the plate. The plate is perfect for wall hung basins, spreading the load of the basin and will also work with semi pedestals or even full pedestals. It is ideal to tile around the plate before the basin is installed, however the plate will work on a pre-tiled wall but please note that there will be a gap of 3.8mm between your basin and the wall which will need to be filled with silicone. Our specially designed SinkFix nylon 'wing' bushings make installation easier and adjust the horizontal axis of the basin enabling it to be installed perfectly level. The plate is designed with the future in mind, so that if you ever replace your basin the bolts can just be re-adjusted to fit the new one.