Oumij Single One-way 12V Wireless Remote Control Switch, 100M Distance, Jog/Self-locking/Interlock, 433MHZ

• The wireless remote control adopts Radio Frequency Identification technology, which is mainly used for remote wireless home appliance control.
• Selectable working modes - Jog / Self-locking / Interlock. It can control one or more devices in the room, and the performance is stable and
• PCB board and plastic. Easy to use.The wireless signal can pass through walls, floors and doors. 100 meters in open area. Suitable for lights, electrically operated doors, curtains, etc.
• Works great, you can use it with a battery pack so you can hack your Halloween decorations and operate them on command. You can wire them both up to the button wires and used the remote to active your props while they were upstaires in your house and your downstairs.
• If you have any doubts about this product, please feel free to contact with us. And we have a professional after-sales team to answer your questions within 24 hours.

Specification: Type: 12V Wireless Remote control single controller Weight: about 57g (controller + remote control) Size: about 3.9x3.6x2.5cm Type: Single One-way remote control Working voltage: 12V Working frequency: 433MHZ Total load power: 10A Remote control distance: 100M Working temperature: -15-75 Package list: 1 * Remote Control 1 * Note: 1. Please allow slight error due to manual measurement. 2. Different monitor colors may be different. Thanks for your kind understanding. Output Mode: 1. Self-locking: Press the same remote control button, press once, the relay is on, press again, the relay is off. 2. Interlock: Press the "A" button on the remote control, the relay will open, press the "B" button on the remote control, and the relay will be off. 3. Jog: Press the "A" button on the remote control, the relay will open, release the "A" button on the remote control, and the relay will be off. If you keep pressing the "A" button, the remote control is always on. When will it be released then when the relay is off. Remote Control: 1. Clear code: Press and hold the learning button, the indicator light is on. After about 8 seconds, the indicator light flashes 3 times and then off, indicating that the clearing is successful. The remote controllers that were paired before being erased are all deleted. 2. Working mode selection: The switching mode of this is changed by using the jumper cap. The jumper cap is not inserted into the jog mode, inserted in the middle of the T is self-locking, inserted in the L and the middle is interlocked.