Shower Seal for Screens, Doors or Panels | Fits 4, 5 or 6mm Glass | 20mm Deflector Fin for When There is No Gap | 80cm, 90cm, 140cm or 2m Long | SEAL107 (140cm)

• Fits 4-6mm Glass
• This seal is normally used when you have no gap or your gap is too small for a standard seal
• Side fin will deflect water back into your bath or shower tray
• Can be used vertically or horizontally
• Available in lengths of 800, 900, 1400 or 2000mm

SEAL107 SEAL107 is a seal with a 20mm fin that is commonly found on shower doors and bath shower screens, this seal is normally used vertically either in pairs or singularly on the bottom horizontal section of the glass. This seal can be pushed into place over any glass that measures between 4mm and 6mm and will not need any type of adhesive to hold it in place. This shower seal has a 20mm soft fin protruding at 90 degrees from the top of the U section, which when used vertically will normally either contact the glass, wall or a matching seal. If used on the bottom of a bath screen the fin will deflect water away from the seal and back into the bath. If you require the same seal with a shorter fin then we also sell SEAL031 which is the same shape and glass thickness but with a 10mm fin. SEAL107 is available in 4 different lengths, choose from either 800mm (80cm), 900mm (90cm), 1400mm (140cm) and 2000mm (200cm). This seal can easily be cut down to your required length using a junior hacksaw, or if you prefer we can cut the seal down to the length that you require. Need any further help fitting or finding the correct seal, please contact us and we would be more than happy to help.