Self Adhesive Light Switch Surround Unfinished Pine Ready to Paint or Stain

• Contemporary Pine Decorative Switch Surround - Self Adhesive foam strips supplied, No Wiring Needed - most standard 1-way/2-way plain white plastic switches, no larger than 86mm x 86mm - PLEASE CHECK SIZING BEFORE PURCHASE
• Transform the appearance of most standard 1-way/2-way plain white plastic switches in minutes - Match or contrast with your room decor as your mood dictates. Supplied with self-adhesive foam strips.
• Recessed at the rear to sits around and cover the edges of your existing switch by approximately 5mm on all sides - Suitable for most standard 1, 2 or even 3-way single DIN switches which are no deeper than 10mm
• Dimensions (Approx. mm): External 127 x 127 - Internal/Aperture (hole): 77 x 77 - Depth (Deepest Point): 18mm - Frame Material Width: 25

Contemporary - Pine Decorative Switch Surround - Self Adhesive - No Wiring Needed Approx. External Dimensions: Height 127mm - Width 127mm Approx. Internal/Aperture: Dimensions: Height 77mm - Width 77mm Approx. Depth at Deepest Point: 18mm Width of Framing Material: 25mm Transform and renew the appearance of standard 1gang/2gang plain white plastic switches in minutes into a fashion statement. Match or contrast with your room decor as your mood dictates. This Pine surround finishes off a decor that deserves a stylish hint of coloured wood. Changing and converting switches to suit your decor can be very expensive. By installing a variety of BuyItBetter decorative switch surrounds or cover plates, you will be able to remodel, rejuvenate and revitalise all your old plastic switches at less than half the cost of installing new decorative switches. Protect surrounding wall surfaces from unsightly marks. Especially useful when grubby kids hands are a likelihood. Installation This decorative switch surround is attached to your wall by applying the supplied self-adhesive tape. The switch surround is recessed at the rear and sits around and covers the edges of your existing switch by approximately 5mm on all sides. Suitable for covering most 1, 2 or even 3 gang switches which are no deeper than 10mm. Hints Prior to installing the decorative switch surround, clean the area of the existing switch plate that will be left exposed, with a proprietary cleaner or methylated spirits. WARNING - ELECTRICITY KILLS - IF IN ANY DOUBT CONSULT A QUALIFIED ELECTRICIAN