SEBSON 2x PIR Sensor Light Switch, Wall Mounted, Infrared Motion Sensor, LED suitable, Flush Mounted, programmable, Range max. 9m/160°

• Motion Detector for indoor and flush mounting, installation dimensions 50x50x33mm, 3-Wire.
• The motion detector has a maximum power consumption of 100W for LED lamps or other energy-saving lamps.
• The infrared sensor detects movements in a detection range of up to 9m at a detection angle of 160° and switches on the connected lighting. After a preset time of approx. 10 seconds to 7 minutes, the motion detector switches off again.
• The built-in motion detector can also be adjusted according to the ambient brightness (in the range between 3 and 2,000 LUX).
• Scope of delivery: 2x IR motion detector flush-mounted.

<b>IR flush-mounted motion detector with on/off switch</b><br> With this motion detector, you have variable switching options: Manual switching on and off or switching on when moving and switching off according to the time schedule. The infrared sensor detects movements of persons, large animals and vehicles in a detection range of up to 9m at a detection angle of 160° and switches on the connected lighting. After a preset time of approx. 10 seconds to 7 minutes, the motion detector switches off again. With the help of a controller, the switch-on sensitivity of this device can be regulated depending on the ambient brightness (in the range between 3 and 2,000 LUX). You can operate lamps up to a maximum of 100 watts (total) with this motion detector.<br><br> <b>Product features</b><br> Operating voltage: 220-240V AC 50/60Hz<br> Max. Power consumption: max. 100W (with energy saving lamps)<br> Power consumption on standby: 0,5W<br> Switch: On, off or detector<br> Detection speed: 0,6-1,5m/s<br> Detection range: Max.9m (<24°C)/160°<br> Ambient brightness: <3-2.000LUX<br> Protection: IP20<br> Switch-off delay: Min. 10s +/-3s - Max. 7min +/-2min<br> Ambient temperature: -20° to +40°C<br> Humidity: <93%<br> Suitable for flush-mounted boxes: 60mm<br> Suitable for cavity boxes: 68mm<br> Installation dimensions: 49x49x31mm<br> Housing material: Plastic<br><br> <b>Scope of delivery:</b><br> 2 x SEBSON IR motion detector flush-mounted