SCULPFUN One Roll Glitter Red Plotter Film Textile 12x60 Inch PU Flex Film Heat Transfer Vinyl Plotter Film Textile for DIY Fabrics, T-Shirts, Hats, Bags, Shoes

• Package and size: This set contains a roll of glittering red plotter film. The size of this film is 30.5 x 152.4 cm / 12 inches x 5 feet and can be freely adjusted according to your creative needs.
• Easy to use: you can easily cut, weed and transfer even if you are a beginner. These vinyl sheets simply use a process cutting machine to cut the hot vinyl, transfer the image to the fabric, heat it with a heat press or iron, and remove the protective film. Press firmly to be done! Just remember to apply enough pressure to achieve long-lasting results.
• Premium quality: the flex films are made of environmentally friendly PU material, which is soft and durable and does not fall off or fade easily. After ironing, it is recommended to wash it with water after 24 hours.
• Strong adhesion: These heat transfer films adhere well to the surface and do not wear out even after several washes. The recommended ironing parameters for this ordinary PU are 150-160 degrees Celsius. After cooling for 15-20 seconds, slowly peel off the protective film on the front of the engraved film.
• Wide application: the product has a wide range of applications and is suitable for various fabrics such as clothing, shoes, bags, pillows, socks and luggage as well as non-woven and Oxford fabrics.

Specifications: Size: 30.5 x 152.4 cm / 12 inches x 5 feet. Packing list: A roll of glittery red plotter film Method of use: 1. Design: select the designed pattern in the cutting software, choose the setting for the mirror cutting of the pattern, and adjust the cutting parameters according to the type of engraving film. 2. Cutting: lay the engraving foil flat on the cutting pad with the back facing up. 3. Weeding - Remove the cut label film from the cutting pad, then remove excess film material from the pattern according to the design. 4. Ironing: Place the grid-coated engraving film face up on the surface of the carrier, then attach a high temperature cloth to the surface of the engraving film and select suitable ironing parameters for ironing. 5. Peel: After ironing, wait for the surface heat of the object to cool before removing the high temperature cloth covering the surface, and slowly peel off the PET protective film on the front of the engraving film. 6. Washing: Wait 24 hours after ironing and peeling off before washing the film.