Scalnuvyyh Crank Removal Tool and Bottom Bracket Removal Tool, Bicycle Crank Puller Bike Crank Extractor Puller Tool Set for 16 mm Wrench Bottom Bracket Tool Compatible with (Shimano/ISIS/Octalink)

• 【Bicycle Crank Puller and Bottom Bracket Tool Kit】- This crank puller kit contains 1 x bicycle crank puller, 1 x top cap, 1 x bottom bracket tool, 1 x bottom bracket puller anti-fall tool, 1 x lubricating oil, 1 x lubricating grease, 1 x double end wrench, 1 x Allen key, with bottom bracket extractor kit, you do not need to buy the crank extractor puller and bottom bracket tool separately, the crank puller As a bicycle set as a bicycle Tool ideal for cyclist enthusiasts
• 【Bicycle Crank Puller】- The crank removal tool is made of high-quality carbon steel; the hard thimble and precision thread do not hurt the crank thread. You only use a 16 mm wrench or adjustable wrench to insert and remove the bicycle crank, when removing bicycle crank, screw the bicycle crank puller into the threads completely until it is fully tightened to remove remover, otherwise damage to the threads
• 【Bottom Bracket Tool with Anti-fall Tool】- The bottom bracket removal tool is made of high carbon steel, inner bearing tool comes with 20 teeth groove design, which is compatible with all 20 pinion bottom bracket and standard square crankset. The anti-fall tool helps you fix the bicycle bottom bracket tool well to prevent it from falling out, which you remove the bottom bracket easily. Use the large end of the double end wrench to remove the bottom bracket tool
• 【Bicycle Crank Puller kit for Widely Used】- crank puller bicycle and bicycle bottom bracket tool is mainly used for the installation and removal of cranks, splined teeth and standard square bicycle bottom bracket, compatible with standard, square and splined bottom bracket. Crank puller and bottom bracket tool is almost for repairing most bicycles, such as mountain bikes, road bikes, children's bikes, commuter bikes or electric bikes, etc
• 【Notes】①Before you buy this crank puller kit, if the crank nut is Allen key, please use our Allen key, if it is outer hex nut, you can directly use the silver end of our bicycle crank puller to remove the nut. A separate wrench is required for removing crank, you need to buy it yourself
• 【Notes】② If you use crank puller, make sure the black end is tight, strengthen it with a wrench and then screw in the silver hexagonal end, which is less likely to damage the thread. ③ When using the bottom bracket tool, if the bottom bracket is square, please install the bottom bracket puller first and then the anti-fall tool. When the bottom bracket is toothed, work in reverse order
• 【Notes】④ When you install the pedals, please distinguish between left and right, and make sure the crank is on the same level. ⑤ Use of lubricating oil and grease: when you take off a bicycle crank, apply the lubricating oil to the crank thread to easily remove the nut; When mounting the bottom bracket, apply grease to the bottom bracket and the inner wall of the crank to facilitate the maintenance of the bottom bracket and crank

Scalnuvyyh crank puller bicycle and bottom bracket tool protect the cranks and centre shafts of your bike for your ride Package includes: 1 x bicycle crank puller. 1 x top cap. 1 x bottom bracket puller. 1 x anti-fall tool. 1 x double end wrench. 1 x Allen key. 1 x lubricating oil. 1 x grease. 1. Crank nut removal. How to use the bicycle crank puller tool? *Situation 1, If the crank nut is an Allen nut, please use a hex key directly (bring yourself). *Situation 2: If the crank nut is a hex nut, you can drip lubricating oil and wait 2 minutes, align the silver end of the crank puller of the nut and remove it with a wrench (not included). 2: Bicycle crank puller installation. *Situation 1. Install bicycle crank puller directly if it is the square bottom. *Situation 2. Please install the top cap on the black end of the bike crank puller if it is spline bottom bracket" 3. Tighten, tighten the black end of the crank puller with a wrench. 4. Rotate, turn the silver hex end of the crank puller clockwise with the wrench. 5. Completed, press out the crank and the disassembly is complete. How to use a bicycle bottom bracket tool? 1. If the bottom bracket is square, please install the bottom bracket puller first and then the anti-fall tool. If bicycle bottom bracket is splined, please install anti-fall tool first and then bottom bracket removal tool. 2. Loosen the bottom bracket with a wrench. Right bottom bracket - turn wrench clockwise to loosen it; Left bottom bracket - turn wrench counterclockwise to loosen it, remove the bike bottom bracket. Please note: You can use our double end wrench to remove bottom bracket, as well as this double end wrench can help in other repairs, different openth size of the wrench can help you loose or tight different screw.