Sanha Therm 24000 Series Female End Tee for Closed Heater, Compressed Air Systems and Fire Extinguishing Equipment, Steel (Reference: 12413076)

• Tee, female press
• Sanha T-Shaped Part
• Reference: Sanha 12413076
• SANHA GmbH & Co. KG is among the leading manufacturers in Europe of piping systems for the heating, sanitation and air conditioning sector.

The SANHA®-Therm installation system consists of SANHA®-Therm press fittings tested with a black EPDM ring on the moulded part and SANHA®-Therm carbon steel tubing according to DIN EN 10305-3. This carefully crafted installation system and components offer a very economical solution for closed heating installations. SANHA® Therm is also perfect for compressed air systems and fire extinguishing equipment according to DIN EN 10346 (type DZ). The 28000 series is also available as LABS* and silicone free with a FKM red gasket and packaged separately. Carbon steel tubes are subject to special corrosion conditions and can therefore only be fitted in accordance with SANHA corrosion protection regulations. SANHA®-Therm press fittings are marked on the outside with a red dot. *LABS = free of disturbing substances for paint lines. Features Combipress = + Tool compatibility: can be pressed with jaws or rings with original SA, V and M profiles up to 54 mm and thus avoiding any risk of mistaking tools + visible leakage control system (if not pressed there is visible leaks) together with + Push & Stay: safe installation in any position Quick assembly without risk of fire The connection with tubes Carbon steel by press Cold drawn allows for quick assembly that saves time and eliminates the risk of corrosion and fire hazard. Therefore, the SANHA® Therm installation system is also perfect for renovations. High flexibility, increased corrosion protection thanks to external galvanisation. All dimensions from 12 to 108 mm available, 67 mm including secure connection: inseparable by pressure with carbon steel tubes according to DIN EN 10305-3 or DIN EN 10346 (type DZ) thread of transition fittings according to DIN EN 10226 or ISO. 7/1, Models R and P Various combinations SANHA®-Therm installation tubes galvanised on the outside: precision steel tubes with longitudinal continuous welding, exhaust proof under pressure, thin wall and galvanised on the outside, thanks to the non-galvanised interior, they are suitable for heating (no risk of soiling the pump) steel without alloys E195 (RST 34-2) with material no. 1.003 4 in accordance with DIN EN 10305-3 supply status +CR1 SANHA®-Therm installation tubes galvanised on the outside and inside (type DZ): precision steel tubes without alloys, continuous longitudinal and thin wall welding galvanised steel tubes continuous band (Sendzimir process) according to DIN EN 10346 Greater corrosion protection through Sendzimir galvanisation. on both sides and Suitable for fire extinguishing equipment and sprinklers systems. The material of the band after electroplating is E 195 (Z275 MBO) with material no. 1.0034 according to DIN EN 10305-3 supply status +CR2. Available in sizes from 22 to 108 mm (range of sprinklers) SANHA® installation bobs ®-Therm Contiflo, galvanised: steel tubes without alloys E195 with material no. 1.0034 according to DIN 10305-3, thin wall and kiln-galvanised. They can be deformed during assembly. They have invisible welded seams. They have a clean, dry and grease-free surface. Areas of application compressed air (dry, oil ≤ 25 m³). sprinkler system. ler (wet) heating (closed circuits, no DZ tubes) naval cooling water ducts