Ruko HSSE-Co 8 Bi-Metal Hole Saw with Fine Toothing, White Finish, 50.0 mm Diameter, R126050

• Bimetallic hole saw HSS Co 8 with fine teeth.
• Fine teething is particularly well suited for metals
• Ensures smooth running and less effort.
• Low heat generation in cutting tool life is increased particularly in metals
• other accessories such as receiving holder, drill guide and ejector spring sold separately.

RUKO carbide hole saws are used in hand-held and upright drills. In column drilling machines, use only manual feed. Bimetal hole saws, HSS Co 8 with fine teeth The fine toothing is particularly well suited for metals. It ensures a smoother running and less effort. Low heat generation during the cutting increases the life of metals. Suitable for unalloyed and alloyed steels (up to 1000 N/mm strength), chromium-alloyed steels such as VA, stainless and acid resistant steels, non-ferrous and light metals. Features: Stable construction. Hole saws and shaft in two parts, hence fast assembly and change of different hole saw diameters. Positive rake angle and interface provide an aggressive cut The teeth are welded to a body made of special steel Good chip removal. Lateral slots in the body help to remove the cut parts. Replaceable centre drill. Stable construction Hole saws and shaft in two parts, hence fast assembly and change of different hole saw diameters. Positive rake angle and interface provide an aggressive cut The teeth are welded to a body made of special steel Good chip removal Lateral slots in the body help to remove the cut parts. Replaceable centre drill Instructions for use: Not suitable for percussion drilling Drill with light and even pressure Avoid oscillations Observe speed table Use coolant Technical data: Diameter: 50.0 mm Cutting depth: up to 38.0 mm For record holder: A2/A6/A7 Cutting: HSS Co 8 Teeth: Fine teeth Body: Special steel cutting to the right Packing unit: in carton packagingDelivery is done without cradle. This is available separately as an accessory