Rowiz 4 X Green RC 1:10 Scale On-Road Tires Wheel Rims Hex 12MM Crossing Rubber

• Tire Outer Diameter: 72mm/2.83 Inches,Tire Width: 27mm/1.06 Inches; Wheel Diameter: 45mm/1.77 Inches; Wheel Drive Hex: 12mm/0.47 Inches; Axle Hole Diameter: 4mm/0.15 Inches
• Suitable for 1/10 On Road Rally or Touring Car, Also Can Run on 1/14 1/16 1/18 Off Road Vehicles If The Drive Hex Match, Pls Must Check Sizes
• Compatible with Tamiya, Kyosho, Exceed RC, Traxxas, Redcat, HSP, Serpent, 3Racing, etc. Please Check Your Model’s Specs for Compatibility Before Buying
• Material: Soft Rubber Tires & Foam Inserts, Twin 7-Spoke Plastic Wheel Rims(Not Perfect for High Speed); Rally Block Tire with Nice Grip and Traction on Most Flat Road and Off Road Surfaces
• The Tires are NOT Pre Glued on Rims, Please Clean the Joint Surface of the Rim and Tire Before Gluing

Product description Features: Material: plastic wheel rim, soft rubber tyre with foam insert; Not Pre Glued. It’s suitable for RC 1/10 on road car, also can be used to 1/14 1/16 1/18 off road rc vehicles if the hub drive hex match. Dimensions: Tire outer diameter: 72mm/2.83" Wheel diameter: 45mm/1.77" Tire width: 27mm/1.06" Wheel hex: 12mm/0.47" Axle hole diameter: 4mm/0.15" Please must check size before buying. How to Strengthen Wheel Rims: (1) First, make sure the wheel center hole size matches the original OEM rims. Sometimes you may need to drill out the center hole slightly so the rims fully fit over the axle shaft. (2) It is best to use nylon insert lock nuts with flanges. (3) To add a washer. Adding a washer to the outside of the rim will evenly distribute the force over a wider area. For extra strength, can glue the washer to the rim.(This is not necessary, up to you) Package Contents: 4 x Wheel Rims 4 x Tires with Foam Inserts Note: The tires are Not Glued on rims, you need to glue them by yourself before they work. Directions 1. Clean the joint surface of the rim and tire before gluing. 2. Glue the tire onto the rim. 3. For extra strength, add a washer to the outside of the rim and optionally glue it to the rim. 4. Ensure the wheel center hole size matches the original OEM rims and may need to drill out the center hole slightly so the rims fully fit over the axle shaft. 5. Use nylon insert lock nuts with flanges for added strength. Safety Warning Keep away from fire.