ROLINE | M.2 To SATA III SSD H/W Adapter | 2x M.2 NGFF SSD | Bootable and Raid-Capable

• Supports two M. 2 NGFF SSDs with B-Key and form factor 2230, 2242, 2260 and 2280
• M.2 NGFF SATA SSDs can be primary boot device and contain Operating System and applications
• Raid 0 and RAID 1 configurable via hardware or software; configuration on the hardware side via 6 pins with jumper (jumper table on the back of the board)
• The 2.5 inch H/W adapter can be installed in a 2.5" Housing and is therefore perfectly suited for mobile use
• No drivers required

2.5-Inch H/W adapter for the installation of two M. 2 SSDs (NGFF), bootable and raid-compatible and with 6Gbit/s SATA connection! supports two M. 2 NGFF SSDs with form factor 2230, 2242, 2260 and 2280 M.2 NGFF SATA SSDs can be primary boot device and contain operating system and applications. RAID 0 and RAID 1 configurable via hardware or software; configuration on the hardware side via 6 pins with jumper (jumper table on the back of the board) The 2.5 inch H/W adapter can be installed in a 2.5" Housing and is therefore perfectly suited for mobile use. no drivers required lieferumfang: hdd adapter .