KALEA-INFORMATIQUE PCIe Gen 3.0 x16 riser adapter to M2 E A Key port, 20cm ribbon length

• Allows a PCIe 1x, 2x, 4x, 8x or 16x card to be mounted on an E, A or E+A Key type slot.
• Be sure to check beforehand whether the E/A key port on your motherboard can accept any peripheral or not (some older motherboards will only accept a wifi or Bluetooth type card in this type of port).
• This riser is for PCIe M Key M2 SSDs only (NVMe or AHCI). The internal part fits into the M2 E, A or E+A Key slot. It is in 2230 format and will therefore fit all formats (2230, 2242, 2260, 2280, 22110), and has the E+A Key.
• The external part has a 16x PCIe connector. The two parts are connected by a 20cm flexible shielded cable.
• For PCIe Gen 3.0: does not affect the performance of the M2 port or its type (PCIe Gen 1.0, 2.0, 3.0 etc...)

Allows you to mount a 1x, 2x, 4x, 8x or 16x PCIe card to a Type E, A, or E+A Key port. Be careful to check before whether the I/O key port of your motherboard can accept any device or not (some old motherboards will only accept a wifi or bluetooth type card on this type of port). Specifications: This riser is for PCIe M Key type M2 SSD only (NVMe or AHCI). The inner part will be housed in the slot M2 E, A or E+A Key. It is 2230 format and will therefore fit all formats (2230, 2242, 2260, 2280, 22110), and has the E+A key. The external part has a PCIe connector type 16x. The two parts are connected by a flexible armoured tablecloth measuring 20 cm. For PCIe Gen 3.0: does not affect the performance of the M2 port or its type (PCIe Gen 1.0, 2.0, 3.0 etc...). Power recovery on PCIe plate via floppy connector (SATA 15 point / floppy adapter included). Supplied with screwdriver and screws to attach the M2 E A Key part to the dedicated slot.