Reversing ring/adapter 52mm for Olympus

• ✔️ For reversed screwing a lens to the camera. As a result, the lens works similar to a magnifying glass
• ✔️ Super macro shots for little money. Cheap alternative to expensive macro lens
• ✔️ High-quality workmanship. Allows lower recording dances and higher image scales
• ✔️ Image scale 1:7 to 1:2.8
• ✔️ Filter thread: 52 mm

Retro adapter (reverse ring) for Olympus 52 mm. Super macro shots for little money. High-quality workmanship. Cheap alternative to expensive macro lens. Imaging scale 1:7 to 1:2.8 close-range photography at the highest level. With this retro adapter, you can screw any lenses in the reverse to the camera and thus macro lenses refunction. This allows you to take fantastic macro shots without having to spend horrible sums on expensive lenses. Using the filter thread, the lens is screwed reverse to the camera. In this so-called retro position, the lens works similar to a magnifying glass. As the focal length is significantly shorter than in the normal position, lower shooting distances and higher imaging scales are possible. You can get closer to the subject with the lens and it is displayed larger on the image plane. The reverse ring is very delicate and yet very stable. Its low strength creates only a very small distance between the lens and the camera, which does not lead to loss in image quality. Technical details: Thread diameter: 52 mm. Image scale 1:7 to 1:2.8. Note: Since the reverse ring does not transfer electronic data, you need to focus manually and adjust the aperture. Most cameras can calculate the exposure time by automatic time. However, for some it needs to be adjusted manually. Compatibility: Olympus E-620, E-600, E-520, E-510, E-500, E-450, E-420, E-410, E-400, E-330, E-30, E-5, E-3, E-1 Pansonic Lumix DMC-. LumL1, DMC-L10 etc