Pzsmocn: LED RGB color-changing lamp bead module, compatible with Raspberry Pi and Arduino development board, suitable for smart home, office teaching and robot interaction.

• Onboard F5-full-color RGB foggy common cathode LED components, connect the module to the PWM port of the microcontroller, and connect "-" to GND.
• Built-in red, green, and blue lights, and the ratio of these three colors can be adjusted through the change of PWM. In theory, this method can be used to simulate all colors of light and display it on the LED
• The product comes with a JST PA SMT 4-Pin horizontal sticker and a buckle socket. In addition, we also provide a JST PA to DuPont female 4-pin single-ended cable for easy wiring.
• The product has the characteristics of small size, simple peripheral circuit, high quality, clear identification and so on. It is convenient for you to carry it with you and get started quickly. It is suitable for smart home, office teaching and robot interaction.
• Wiki: http://www.pzsmocn.wiki/index.php/LED_RGB

Thank you for choosing our LED RGB Variable Color Lamp Bead Module. This is an ordinary LED RGB color-changing lamp bead module, using F5 atomized full-color RGB common cathode LED as components. When using, only need to connect the RGB module to the PWM port of the microcontroller, and connect "-" to GND. This product has built-in red, green, and blue lights, and the ratio of these three colors can be adjusted through the change of PWM. In theory, this method can be used to simulate all colors of light and display it on the LED. In addition, this product also has the characteristics of small size, simple peripheral circuit, high quality, clear identification and so on. It is convenient for you to carry it with you and get started quickly. It is suitable for smart home, office teaching and robot interaction. The module comes with a JST PA SMT 4-Pin horizontal sticker and a buckle socket. In addition, we also provide a JST PA to DuPont female 4-pin single-ended cable for easy wiring. Model and Standard Module Specifications ■ Operating Voltage: DC 3.3 to 5V ■ Communication Interface: JST PA SMT 4-Pin interface ■ Dimensions: 22MM * 29.88MM * 11MM ■ Mounting Hole Size: 3MM ■ Installation Hole Spacing: 15MM Wire Specifications ■ Withstand Voltage: Less than 50V ■ Withstand Current: Less than 1000MA ■ Length: 20MM ■ Wire Sequence: Black(Negative power supply), Red(Positive power supply), Green(SDA), Blue(SDA) Delivery List LED RGB Variable Color Lamp Bead Module * 1 JST-PA to DuPont 4P Wire（Length:210mm, buckle attached） * 1