Pxyelec RC Cars 12 System Kit 5 Operation Modes for 1/10 1/8HSP TAMIYA CC01 SCX10 Modified Part

• Mode 1: All LED is on.
• Mode 2: For the front LED light, white LED is flashing quickly, blue LED is always on. For the back LED light, white LED is always on, yellow and red lights are flashing quickly.
• Mode 3: For the front LED light, the white and blue lights are flashing in the highest speed frequency in a loop. For the back LED light, the white, yellow, red lights are flashing inthe highest speed frequency as well.
• Mode 4: For the front LED light, the white LED is always on, the yellow LED is flashing slowly. For the back LED light, the white and yellow lights are flashing at the same time, and they are flashing with RED LED alternatively.
• Applicable: 12-LED flashing light system for for 1/10 1/8HSP TAMIYA CC01 SCX10.

Features: Product Installation: 1. Choose a car shell and install the lamp holder. 2. Put the lamp into the lamp holder. 3. Connect each headlight to the socket in the control box according to the control requirements. 4. Glue the main control box to the proper position of the car shell. 5. Fix the light line to avoid the dryness of the wheel running in time. 6. Install all wires and check that they are properly installed. Product mode When the power is turned on, it enters the light mode. Press the control key ""SET"" to enter the following four modes. 1. All lights are on. 2. The front application light flashes white quickly, and the blue light is always on: the white light of the rear car is always on, and the yellow and cylinder lights flash quickly. 3. The front car turns white and the blue lights flash in circles; the rear lights are white and yellow. The red light is flashing. 4. The white light of the front car is always on, and the blue light flashes slowly: the rear light flashes white and yellow, and alternately flashes coal with the red light. Precautions: 1. Please read this manual carefully before installing the product. 2. Please do not use the power supply exceeding the safe voltage. 3. Please do not use this product in the rain to avoid short circuit. 4. Please keep this manual properly so that you can check Yang at any time. Specification: Input voltage: 4.8-6V Working current: 100mA Product size: 47*30*12mm Light line length: 35CM Control wiring:28CM Power connection: 20CM Product weight: 50g Quantity: 1 set Package includes: 1* Control box 12* LED Light 12* Car LED holder 1* Power connection cable 1* Control connection cable